Viewing 9 posts - 1 through 9 (of 9 total)
  • Change the travel in RS Revelations
  • mrmoofo
    Full Member

    I only seem to have 90mm of travel on these forks.
    LBS took out spacers (they were meant to take it down to 120) … and yes, I have lost the spacers

    I can buy a universal spacer kit … but it doesn’t apply to RC Rev solo air.
    How do I know if I have solo or dual air (I accept that this is a very stupid question)
    As there is a value for pressure on the top and bottom of the leg, can I assume it is dual air?
    Ta!

    RickDraper
    Free Member

    Does it have a air valve at the base of the air side leg?

    mrmoofo
    Full Member

    it does …

    RickDraper
    Free Member
    orangewinger
    Free Member

    Doesn’t taking out the spacers increase the travel?

    joebristol
    Full Member

    Maybe my fork is different, but to change the travel on a solo air revelation I had to get a different length air leg (I went from 130 to 150mm travel).

    nickdavies
    Full Member

    To reduce travel on dual air revs you add spacers, so you haven’t lost them they’re just in the fork..

    Sounds like a strip and service will get you back to 120mm to me.

    mrmoofo
    Full Member

    Arse – just ordered the spacers …
    Okay thanks for all the help .
    I need to investigate further …. I had them reduced from 140mm and was handed back two spacers …

    nickdavies
    Full Member

    They’ll have used a spacer travel kit and given you the extra spacers back…
    Iirc you get 2x20mm and 4x10mm normally which wouldn’t all be used.

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘Change the travel in RS Revelations’ is closed to new replies.