Does anyone have any info on how to service a Hope XC rear hub. Chaingng bearings and removing freehub body.
Bike Forum
[closed]
anyone got any info,on servicing a Hope XC rear hub?
-
Posted 2 years ago #
-
Posted 2 years ago #
-
I cannot recommend removing the bearings to "check" them, as it's likely to damage them. Do the checking by testing for play a) at the wheel rim for the main bearings and b) at the cassette for the freehub. If there's more than a small amount of movement, replace them quickly. If you chance it by trying to get a bit of extra life, you risk the bearings breaking up which makes it far harder to remove the remains
Posted 2 years ago # -
Anybody got any tips for removing a freehub body (hope) thats welded itself to the axle..seems almost impossible to shift?
Posted 2 years ago # -
you have taken the circlip off?
edit: ignore me...
Posted 2 years ago # -
Heat
Posted 2 years ago # -
not sure if you could knock axle through from the other side and then it'll be easier to work on out of the hub?
Posted 2 years ago # -
Just bought some wheels you see and the rear hub needs a service. I think I might as well change the freehub and axle bearings all in one go! The seller said they needed doing so I'm just waiting for the bloody postman to deliver them. One week and counting from posted!
Posted 2 years ago # -
you have taken the circlip off?
it's inside and cannot be accessed till the outer bearing is removed. It only retains the bearing inside the freehub body
Drift the axle out of the hub from the non drive side, complete with freehub, then support the freehub and whack the axle out
Posted 2 years ago # -
sfb - hence my edit and subsequent suggestion to drift it out from the non-drive side
Posted 2 years ago # -
Thanks guys I'll try the non drive-side approach...it'll be easier to heat if I need to then
cheers all
Posted 2 years ago # -
sfb - hence my edit and subsequent suggestion to drift it out from the non-drive side
which wasn't there when I posted
Posted 2 years ago #
Topic Closed
This topic has been closed to new replies.
