just wondered what experiences people have had?
Bike Forum
[closed]
anybody using hope rotors with shimano discs?
-
Posted 2 years ago #
-
running LX calipers with hope floating, no problem at all...
Posted 2 years ago # -
surely you mean hope rotors with shimano calipers?
Posted 2 years ago # -
YES
Posted 2 years ago # -
Yes and don't call him Shirley!
Posted 2 years ago # -
Yes and don't call him Shirley!
Posted 2 years ago # -
XTR and hope floaties here. no problems
Posted 2 years ago # -
760xt and hope floats didn't work, rotor/spider rivets hit the caliper.
Posted 2 years ago # -
neil, I'm guessing your new wheels have come?
Posted 2 years ago # -
Donk, were you using post conversion brackets or straight to is mount?
if running is to post conversion you could have spaced the caliper to allow rivets to pass.Problem solved.
Posted 2 years ago # -
is to post IIRC and I'm pretty sure it was the caliper tabs that were rubbins agains the rotor rivets not the adaptor. Could have fudged it but then the rotor would not have been running in the centre of the caliper.
Or do you mean spaced rearwards away from the fork leg instead of to the left away from the wheel?
Posted 2 years ago # -
Spaced away from mounts/fork/ yes
I know its a tad Heath Robinson, but it has worked when i had the wrong rotors before a weekend away.Posted 2 years ago # -
XTR, Hope floaters here also, no problems.
Posted 2 years ago # -
Hope floating rotors with Saint M810 calipers - little bit of filing on caliper to clear float rivet. Otherwise great combo.
Posted 2 years ago # -
Really old 525 on hope floaters, no problems here either.
Posted 2 years ago # -
As per zangolin, Hope 183's with Mb10 Saints required a little filing to clear the rotor rivets.
Posted 2 years ago #
Topic Closed
This topic has been closed to new replies.
