Overview Chat Bike Members News Women
Viewing 9 posts - 1 through 9 (of 9 total)
  • 853 PA and bolt through 140 Revs?
  • Wally
    Full Member

    Always used older 130mm on the frame and I realise it is designed for 130mm. Opportunity to change to 09 140 maxle lite revs (pike lower version) – good idea?

    Posted 13 years ago
    Wally
    Full Member

    Mike – I am the original owner with receipt – So want to keep in warranty.
    Although frame seems bullet proof.

    Posted 13 years ago
    myheadsashed
    Full Member

    I wouldn't worry about 10mm

    I use 150mm on a MK1 PA and Im a fat f00k 😕

    Posted 13 years ago
    mike-at-dialledbikes
    Free Member

    Wally, 140mm will be fine.

    Posted 13 years ago
    walleater
    Full Member

    Aye, my Pikes are fine on my 853 PA.

    Posted 13 years ago
    Wally
    Full Member

    Many thanks Mike for reply and all others, fantastic customer support.

    Posted 13 years ago
    Swayndo
    Free Member

    I'm using a 140mm 2009 Rev Maxle on my mk1 520 PA without any issue. Climbs and descends better than I do.

    Posted 13 years ago
    scott_mcavennie2
    Free Member

    I did inners uplift on my 520 with a mate on his 853 last Sunday, both with 140mm pikes. Great fun.

    Posted 13 years ago
    simon_g
    Full Member

    Not 853, but I've had both mk1 (with the extra tube) and mk2 (without, but pre-73mm BB and CEN testing) on 140mm Pikes. No big difference over the 130mm Revs I had before, other than an improvement in stiffness.

    Posted 13 years ago
Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘853 PA and bolt through 140 Revs?’ is closed to new replies.

Overview Chat Bike Members News Women