Which dropper on Tr...
 

[Closed] Which dropper on Trek Fuel EX 8

Posts: 0
Free Member
Topic starter
 

Mate wants a dropper and has a Fuel EX 8...does the seat tube bend affect which droppers he can get?

Any Fuel EX owners use a dropper, which one please?


 
Posted : 29/08/2012 9:54 am
Posts: 0
Free Member
 

I run a 2012 rockshox reverb on my 2011 ex8. Fits great, not had any problems with the cable snagging either


 
Posted : 29/08/2012 11:25 am
Posts: 0
Free Member
Topic starter
 

Sounds like no issues with the bend in seat post then. I'll let him know.


 
Posted : 29/08/2012 12:28 pm
Posts: 3853
Full Member
 

Joplin here. No problem.


 
Posted : 29/08/2012 12:50 pm
Posts: 35
Full Member
 

I have a 2012 Reba on my 2012 Ex8 too. The hose doesn't fit through the internal frame route (so the front gear cable goes through there).

I cut the hose so it's just long enough to stay outside the rocker, otherwise it would tend to drop inside when lowering the post and form a big loop.


 
Posted : 29/08/2012 1:18 pm
Posts: 0
Free Member
 

Which lenght post have you gone for on a trek fuel ex 8 2012?

I am 6ft tall and was wondering what the best lenght post to get is, i think they both fit the 380mm and 420mm. Just after some advice as which would be the best to go for.

Thanks


 
Posted : 29/08/2012 3:29 pm
Posts: 0
Free Member
Topic starter
 

Ahh Gazzle, just the man, you can take over your own thread now i've done the donkey work for ya ๐Ÿ˜‰


 
Posted : 29/08/2012 3:33 pm
Posts: 0
Free Member
 

Haha, cheers mate! You got to fit it yet when I get one lol


 
Posted : 29/08/2012 3:42 pm
Posts: 0
Free Member
 

I've got the 380mm model and I can slide it all the way down into the frame without problem. I'm 5'10".


 
Posted : 29/08/2012 3:43 pm
Posts: 0
Free Member
Topic starter
 

Fit it?lol


 
Posted : 29/08/2012 3:45 pm
Posts: 35
Full Member
 

I'm 5'11" and have the 420mm 125mm drop one. There's space in the frame for it to go a bit further, but I run it with about 2" sticking out of the seat tube.


 
Posted : 30/08/2012 9:08 am