Whats that hole for...
 

[Closed] Whats that hole for..............

Posts: 0
Free Member
Topic starter
 

....in the swing arm of an Orange 5?
The one thats about 10mm in diameter on the inside, just about where you'd get tyre rub if you fitted fat tyres. Is it for acoustics, like the hole in a guitar.........?


 
Posted : 24/09/2009 4:21 pm
Posts: 50252
Free Member
 

For hiding small octopii


 
Posted : 24/09/2009 4:22 pm
Posts: 0
Free Member
 

it's for attaching these:

[img] [/img]


 
Posted : 24/09/2009 4:25 pm
Posts: 0
Free Member
 

Letting out hot gas during welding?


 
Posted : 24/09/2009 4:30 pm
Posts: 17429
Full Member
 

water drain


 
Posted : 24/09/2009 4:42 pm
Posts: 0
Free Member
 

your dick? ๐Ÿ˜†


 
Posted : 24/09/2009 4:48 pm
Posts: 0
Free Member
Topic starter
 

Hmmmmm Thanks for that Anthony from Switzerland. Despite the small orifice I did give it a try but theres no way I can contort myself into that position ๐Ÿ™‚
geetee's sounds reasonable though....


 
Posted : 24/09/2009 5:23 pm
Posts: 17429
Full Member
 

twang - It's a water drain, that's why there's one on each side...

If you wash the bike you might wanna hold it on it's side for a few moments and you'll see the water run out -)


 
Posted : 24/09/2009 5:59 pm
Posts: 0
Free Member
 

just like the one under the bb


 
Posted : 24/09/2009 6:03 pm
Posts: 0
Free Member
 

It's great for putting small stones in, just prior to selling to the next owner.


 
Posted : 24/09/2009 6:06 pm
Posts: 23322
Free Member
 

bastard. at least i can add up... ๐Ÿ˜‰


 
Posted : 24/09/2009 6:07 pm
Posts: 0
Free Member
 

hee hee!

I can add fine, i've still got all fingers and toes.


 
Posted : 24/09/2009 6:09 pm
Posts: 0
Free Member
Topic starter
 

Its not a water drain, its 10mm and in the middle of the swing arm. There are drain holes near the drop outs and also near the pivots...?


 
Posted : 24/09/2009 6:19 pm
 DrP
Posts: 12108
Free Member
 

Indicators?

DrP


 
Posted : 24/09/2009 6:49 pm
Posts: 0
Free Member
 

i dunno but i now know what i will be doing to my orange 5 owning friend next time i see him..thanks sharki.... need a 9mm ball bearing or two ๐Ÿ™‚


 
Posted : 24/09/2009 7:57 pm