Topic starter
Anyone know what tool you need for tightening/loosening Time ATAC XS end caps? Is there a special tool, or, if not, will a small pin spanner do (and if so, what size)?
I ask as one of mine has come loose post-crash & needs tightening up.
Thanks
Andy
Posted : 04/07/2010 2:52 pm
I cut an old spoke and bent it to size/ shape. Held in vice grip pliers like Mole Grips it works fine.
Posted : 04/07/2010 3:59 pm
Topic starter
I cut an old spoke and bent it to size/ shape. Held in vice grip pliers like Mole Grips it works fine.
Cheers for that - I shall see what I've got that's similar.
Andy
Posted : 04/07/2010 5:21 pm
I use a pair of circlip pliers, though a old spoke bent to shape would be cheaper!
Posted : 04/07/2010 5:32 pm
circlip pliers, needle nose pliers or two small drill bits and a screwdriver.
Posted : 04/07/2010 5:38 pm
Topic starter
circlip pliers
Just the thing! I shall try & get hold of some.
Andy
Posted : 04/07/2010 6:08 pm