Teething problems with 16" Inbred 29er

Spamf

Posts: 0

Free Member

Topic starter

Has anyone else had issues with tyre clearance on the rear mech cable, where it goes from under the BB to the Cable stop on the chainstay?
Also, first time with horizontal dropouts (can they still be [i]drop[/i]outs if they are horizontal?). There is a thick washer, with a small lug seemingly designed to slide along the dropouts. I have the lug to the front to stop the tyre fouling the front mech. Is this right?

Being a Yorkshireman there was no way I was paying £30 to have it built for me, but now I'm being to wonder if I was wrong (don't ask the missus, she knows I'm wrong) especially as I have still to shorten the hydraulic hose. 🙁

Posted : 08/12/2010 1:26 pm

MostlyBalanced

Posts: 0

Free Member

You've put gears on an On One and still call yourself a Yorkshireman?

Posted : 08/12/2010 1:34 pm

wwaswas

Posts: 251

Full Member

spamf - if you could post some pics it might help people to describe a solution.

Posted : 08/12/2010 1:36 pm

br

Posts: 18125

Free Member

A 16" 29er...

http://www.topgearcycles.com/wp-content/uploads/2009/09/img_0486_2.jp g" target="_blank">http://www.topgearcycles.com/wp-content/uploads/2009/09/img_0486_2.jp g"/> &imgrefurl= http://www.topgearcycles.com/archives/360&usg=__R0dGIBw_CX8mpX29e4rMR2AMtGY=&h=2048&w=3072&sz=649&hl=en&start=0&zoom=1&tbnid=ZxUUIofpqPddKM:&tbnh=127&tbnw=187&prev=/images%3Fq%3Dwillow%2Bkoerber%2B29er%26um%3D1%26hl%3Den%26safe%3Doff%26sa%3DN%26rls%3Dig%26rlz%3D1R2ACAW_enGB373%26biw%3D1371%26bih%3D688%26tbs%3Disch:1&um=1&itbs=1&iact=rc&dur=177&ei=yov_TIXxNMexhQen1fXQCQ&oei=yov_TIXxNMexhQen1fXQCQ&esq=1&page=1&ndsp=30&ved=1t:429,r:0,s:0&tx=78&ty=89

Posted : 08/12/2010 1:45 pm

[Closed] Teething problems with 16" Inbred 29er