Topic starter
Looking at my fork and actually all Fox forks I've had in the past I've always noticed the small marks and slight chips in the paint/metal where they've been serviced or come back from the bike shop/service centre like this.
See this image - http://www.pinkbike.com/photo/7004921/
The forks in that picture are not marked up but you can see how the screwdriver would chip and slightly damage the edge of the fork lip when pressing up on the seal. Has this caused anyone any issues over time or is it purely cosmetic and as long as the seals are fine the chips on the edge make no difference?
Posted : 20/08/2015 6:34 pm