Forum menu
Shiny new CCDB
 

[Closed] Shiny new CCDB

Posts: 0
Free Member
Topic starter
 
[#2815199]

Oh god I'm so excited!

[IMG] [/IMG]


 
Posted : 03/06/2011 11:44 am
Posts: 10498
Free Member
 

Man how I'd love one of those for my Nic.

Overkill on a 130mm travel bike?


 
Posted : 03/06/2011 11:47 am
Posts: 0
Free Member
 

Oh man you should be excited. It will blow you way. They really are as good as everyone says they are.

Steve - not remotely overkill, it is still just a damper and whether you have one with a coil spring and air spring, more dials less dials etc, you still need to have one between the swing arm and the main frame, so why not have one that works really really well as opposed to just averagely well?

The only real considerations are cost and weight. If neither of those two factors are an issue, then it's about the easiest decision you'll ever make.

What Nicolai are you riding? I have a CCDB on my Helius AM. If you're ever down in the Surrey Hills you'd be welcome to try it.


 
Posted : 03/06/2011 11:51 am
Posts: 0
Free Member
 

Lovely!

Been so tempted by one for the Mojo, but I would love to try one out to try and justify the expense, as I'm sure with a Ti spring it will offer greater performance to a re-valved RP23, but is it £600 difference?


 
Posted : 03/06/2011 11:56 am
Posts: 14707
Free Member
 

[i]Overkill on a 130mm travel bike? [/i]

<pedant model> but 5's are 140mm</pedant mode>

<tut>.. you might have at least washed the bike pre fitting the shock...</tut>


 
Posted : 03/06/2011 11:57 am
Posts: 9
Free Member
 

Might want to clean that bike a little and the fence needs painting ASAP.


 
Posted : 03/06/2011 11:58 am
Posts: 10498
Free Member
 

Geetee - it's a CC, you know the spangly candy red one.

I live in Hampton Hill, so sometimes I ride down that way when I've got a day off during the week.

z1ppy - I meant mine, not the 'made in yarkshire from girders' one in the pic 😆


 
Posted : 03/06/2011 12:02 pm
Posts: 14707
Free Member
 

ahhhh sorry... 😳


 
Posted : 03/06/2011 12:04 pm
Posts: 0
Free Member
 

I have one on my Five too and love it. so much better than the RP23. Just feels right. Would have gone for The Ti spring which is £200 extra but wasn't available for the 190x50 size (although I think you can get a Ti spring from Nukeproof for that size but apparently the finish is no where near as good as CCDB ones).

now get some mud on it so it matches the rest of the bike!


 
Posted : 03/06/2011 12:20 pm
Posts: 0
Free Member
 

Did OP get a good deal on it?


 
Posted : 03/06/2011 12:36 pm
Posts: 0
Free Member
Topic starter
 

£450 delivered Freeflow bikes, seems like a good deal


 
Posted : 03/06/2011 12:47 pm
Posts: 0
Free Member
 

Cane Creek Ti springs only come in 3" and 3.5" strokes as I remember. The Nukeproof ones do fit; not sure what difference the finish makes as long as it saves weight.


 
Posted : 03/06/2011 1:13 pm
Posts: 0
Free Member
 

Pretty sure LoCo's diverse springs will fit as they are 36.3mm I.D. which is the same as Cane Creek.

http://locotuning.co.uk/dsp-titanium-springs.html

They will also still scuff on the stupid black plastic "protector sleeve" then :mrgreen: :mrgreen: :mrgreen:


 
Posted : 03/06/2011 1:23 pm
Posts: 0
Free Member
 

my ccdb and alpine 160 in just out the box mode

[IMG] [/IMG]


 
Posted : 03/06/2011 1:30 pm
Posts: 0
Free Member
 

*Don't think about the weight*

CCDB = 500g + 500g for the spring = 1000g.

*Don't think about the weight*

Float/RP23 = 280g

*Don't think about the weight*

To spring will save you 150g... so CCDB and Ti spring = 850g

*Don't think about the weight*


 
Posted : 03/06/2011 1:40 pm
Posts: 0
Free Member
 

Am I wrong to think that CCDB on 140mm bike would be a bit niche ? Was thinking about it long time ago ... at least it would be an improvement over Float R. Thought CCDB looks just about right on 160mm bikes but 140mm surely it pushes it?


 
Posted : 03/06/2011 1:45 pm
 Mike
Posts: 4
Free Member
 

Not really, considering what a 140mm travel bike let's you get away with these days...anyone after one in size 215 x 63 😉


 
Posted : 03/06/2011 1:51 pm
Posts: 0
Free Member
 

Heh need to conjure up finances and place an order on 200x57.


 
Posted : 03/06/2011 1:53 pm
Posts: 0
Free Member
Topic starter
 

popstar depends I guess, I only have one bike to cover everything from mincing around the woods to mincing around DH tracks and mincing around the Alps. Not worried about the weight, I'm a fat bastard, I should think about losing a few stone and cutting out the fags before being worried about how much the bike weighs 🙂


 
Posted : 03/06/2011 2:14 pm
Posts: 0
Free Member
 

why Mike? you selling one in that size? if so....


 
Posted : 03/06/2011 2:19 pm
Posts: 0
Free Member
 

anyone after one in size 215 x 63

Pretty sure a mate of mine will take it off your hands. Can you ping me an email, address is in the profile. Let me know how much you want for it.


 
Posted : 03/06/2011 2:39 pm
Posts: 0
Free Member
 

Am I wrong to think that CCDB on 140mm bike would be a bit niche ? Was thinking about it long time ago ... at least it would be an improvement over Float R. Thought CCDB looks just about right on 160mm bikes but 140mm surely it pushes it?

not wrong at all. Why have your frame/bike hamstrung by poor shocks? I really don't subscribe to the thought a good coil is over kill for any bike. Your bike either has a good shock on it or it doesn't. the extra pound of weight is far out weighed by the quality of a good rear shock.


 
Posted : 03/06/2011 2:48 pm
Posts: 0
Free Member
 

Wouldn't it be silly to have CCDB with average forks upfront? Guess Bombers RC3Ti or at least Vanilla's should accomplish it. Anyone run it with Lyrics? How do they fare with CCDB?


 
Posted : 03/06/2011 2:49 pm
 Rik
Posts: 0
Full Member
 

Don't really think people can comment on the performance or advantage of a CCDB until you have ridden a well set up CCDB.

On the reverse though a CCDB is only as good as the set up. A badly set up one will perform far worse than a well set up RP23.


 
Posted : 03/06/2011 3:14 pm
Posts: 0
Free Member
 

Rik you clearly like to spoil excitment. Performance alone in that shock is awesome and then there comes mighty bling! Only thing though, if rider isn't seen riding bike fast ... he will be burned in hell by all attention whores at a trailside.


 
Posted : 03/06/2011 3:28 pm
Posts: 0
Free Member
 

I just got one of them to..
[img] [/img]
About to go + have a tune and ride session on it now!


 
Posted : 03/06/2011 4:03 pm
Posts: 728
Free Member
 

not wrong at all. Why have your frame/bike hamstrung by poor shocks? I really don't subscribe to the thought a good coil is over kill for any bike. Your bike either has a good shock on it or it doesn't. the extra pound of weight is far out weighed by the quality of a good rear shock.

Because in 99% of cases the limiting factor on the bike is the person driving it, not the shock.


 
Posted : 03/06/2011 4:06 pm
 fbk
Posts: 1
Free Member
 

Zangolin - that does actually look lovely. And gold cables - you really have researched this haven't you 😉


 
Posted : 03/06/2011 4:32 pm
Posts: 0
Free Member
 

Because in 99% of cases the limiting factor on the bike is the person driving it, not the shock.

I don't understand your logic here.

Do you mean that no matter how good or otherwise a rider is, that because they aren't riding their bike to the absolute limit of its capability that they therefore can't experience a performance improvement from something like a CCDB?

The rider is ALWAYS going to be the limiting factor on ANY bike.


 
Posted : 03/06/2011 6:15 pm
Posts: 0
Free Member
Topic starter
 

guys please don't threadshit this up, even if Hob Nob's post is shorting my logic circuits. More pictures of CCDBs please! 🙂


 
Posted : 03/06/2011 6:19 pm
Posts: 728
Free Member
 

I don't understand your logic here.

Do you mean that no matter how good or otherwise a rider is, that because they aren't riding their bike to the absolute limit of its capability that they therefore can't experience a performance improvement from something like a CCDB?

The rider is ALWAYS going to be the limiting factor on ANY bike.

No, i'm saying there is many, many better ways of spending the (large) amount of cash to improve your riding rather than on something that will perplex the majority of users due to not understanding the way a shock works.

Plus I don't think they are the revolutionary difference that some make them out to be....

Now there's a can of worms.

Still, if the OP is happy with his purchase, then that's all that matters really.


 
Posted : 03/06/2011 7:14 pm
Posts: 0
Free Member
 

here's mine strait out of the box with some other new shiny bits

[url= http://farm6.static.flickr.com/5011/5793784859_82885104af.jp g" target="_blank">http://farm6.static.flickr.com/5011/5793784859_82885104af.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/63402279@N04/5793784859/ ]DSC01385[/url] by [url= http://www.flickr.com/people/63402279@N04/ ]darren.lee.evans[/url], on Flickr

[url= http://farm6.static.flickr.com/5307/5793821729_8080a907e0.jp g" target="_blank">http://farm6.static.flickr.com/5307/5793821729_8080a907e0.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/63402279@N04/5793821729/ ]DSC01564[/url] by [url= http://www.flickr.com/people/63402279@N04/ ]darren.lee.evans[/url], on Flickr

ready for action at Afan.

Im only an average rider but i've definately noticed the difference both in climbing/pedalling and on the rough stuff. i'd never go back to the standard RP23 now (which is for sale if anyone wants it)


 
Posted : 03/06/2011 7:27 pm
Posts: 0
Free Member
 

[img] [/img]


 
Posted : 03/06/2011 7:52 pm
Posts: 0
Free Member
 

Looks interesting - Proto CCDB airshock up at Fort Bill.
From [url= http://dirt.mpora.com/news/cane-creek-double-barrel-air-fort-william.html ]Dirt website[/url]
[img] [/img]


 
Posted : 04/06/2011 10:38 pm
Posts: 0
Free Member
 

Why has it taken this long?


 
Posted : 05/06/2011 12:21 am
Posts: 0
Free Member
 

Just fitted one on my 06 S-works Enduro along with a set of Vans up front.
Quite simply the best upgrade I've fitted to a bike ever.
Felt fantastic straight out the box with the 'factory' settings, spent a couple of days riding the same short sections of trail adjusting the settings and it feels even better now.

Defo worth spending some time getting it set up properly. Read the manual so you understand exactly how it works and then go out with a pen and paper and make small adjustments each time and take a note of what you've done.


 
Posted : 05/06/2011 12:48 am
Posts: 0
Free Member
 

Just ordered a CCDB for my enduro today, guys at TF tuned were very helpful.
Will post pics once it is fitted


 
Posted : 07/06/2011 3:05 pm
 edd
Posts: 1390
Full Member
 

My CCDB:

[img] [/img]


 
Posted : 07/06/2011 3:21 pm
Posts: 0
Free Member
 

[url= http://farm3.static.flickr.com/2213/5793736369_598d4dd975_z.jp g" target="_blank">http://farm3.static.flickr.com/2213/5793736369_598d4dd975_z.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/55080711@N05/5793736369/ ]Glencoe chair. Macavalanche.[/url] by [url= http://www.flickr.com/people/55080711@N05/ ]thepimpmessiah[/url], on Flickr


 
Posted : 07/06/2011 3:44 pm
Posts: 0
Free Member
 

@ Hobnob: 'the majority of users do not understand the way it works'

is this shock is so complicated that only you understand it? Frankly, I'm offended. It's a shock, not a nuclear reactor. 😉

That Scalpel is damn sexy, good luck to yer...


 
Posted : 21/06/2011 10:40 pm