Topic starter
Before I've done it by bashing the bolt with a mallet, but it doesn't go in very straight. The tools just look like a cylinder with a male thread on the end?
Posted : 30/01/2012 9:31 pm
Use a long series socket I do and it works fine .
Posted : 30/01/2012 9:33 pm
I just tap it in with a bolt - checking its going in straight.
Posted : 30/01/2012 9:34 pm
Socket and an old screwdriver for adjustment if needed. Be patient and use the bolt as a guide if you need to make any adjustments
Posted : 30/01/2012 9:51 pm