[Closed] Rock Shox Recon Sl service parts

http://www.tftunedshox.com/Catalogue/Shop-RockShox/RockShox/RockShox-Recon-Parts

Thanks for the reply I have seen the service kits, I was hoping to just get hold of some o rings and circlips seperatly, but am not sure what sizes I need.

I think Peter Poddy has the answers.

I only needed one seal which was the inner seal on the base plug at the bottom of the damping leg, that the shaft slides through.

I got them from [url= http://simplybearings.co.uk/shop/p80133/BS206+3.53mm+Section+12.29mm+Bore+Nitrile+Rubber+O-Rings/product_info.html ]Here.[/url]

only needed one seal which was the inner seal on the base plug at the bottom of the damping leg, that the shaft slides through.

Would that be the one that always goes ? Allowing the fluid to migrate to the lower leg. if so I'm getting some to save the £20 for the whole set.

Hi carlosg - if you're getting some can you get me some or do some sort of a group buy thing? Im willing to bet they're the same as in reba's and rev's.

In the meantime I bought these to try in my revs and the one I needed (lower inner damper) was perfect (I didnt need them all so dont know if they're all the right fit): [url= http://tiny.cc/vw76k ]ebay[/url]

Just to state the obvious - I dont know about your exact model!

Has any one picked up one of the assorted o ring boxes from ebay? Looks like it could save lots of money if they have the correct sizes. This is the sort of thing http://tiny.cc/4sdqr

couldashouldawoulda , that link to the ebay seal kit is perfect , Reba's are what I need to repair. £8 posted is a bargain seeing as I'd be looking at a minimum of £4.31 for 1 O ring off the other site.

Hi tbant

Just going to do the same service on my recons and wondered if you got the info on the sizes you needed?
I could also do with knowing the circlip and o ring sizes?
any help would be great
thanks