The new 11spd long cage road mechs are rated to 32t cassettes now.
Putting together a touring adventure bike and Im running shimano 11spd 105 compact and saw this SRAM cassette 11-36t for the CX1 groupset
https://www.sram.com/sram/road/products/sram-pg-1170-11-36-cassette
As mtb mechs can handle 40t, do we think the road mechs can handle a 36t cassette???
I don't know 100% but from doing some research over the past few weeks it seems it probably will (assuming longish b-tension screw and deraileur hanger), but likely only for a 1x11 setup, 2x11 at a real push, but for 3x11 you would have to swap the cage for an mtb cage to get enough chain wrap
The long cage road mechs look about the same length as the mid cage mtb mechs.
It's a shame 10 spd mtb mechs don't work with road 11spd sti - like what you can do with 9std mtb mechs and 10spd stis. That would be ace with a clutch mech.
yer will work, short cage does 32t no issues depending on your mech hanger
i did old Di2 with a 11-32 XX cassette no problem, switched the jockey wheels to 10t
[URL= http://i829.photobucket.com/albums/zz211/dansipods/IMG_0390-1.jp g" target="_blank">
http://i829.photobucket.com/albums/zz211/dansipods/IMG_0390-1.jp g"/> [/IMG][/URL]
Thanks but is the spacing on a mtb xx1 cassette the same as a road 11spd cassette. Plus 36t is quite a bit bigger than 32t.
That looks very cool though is that the (now redundant) k edge system?
It's a shame 10 spd mtb mechs don't work with road 11spd sti
Why won't they? Different pull ratios?
Yep different pul ratio
hi, i don't know how relevant this is - i built up a carbon cyclocross bike to act as an adventure racing/touring bike, and at 19 lbs weight also as my road bike.
i have a 50/34 in front and a 10 speed 11 / 36 behind, the mech is an xt. it all seems to work well with a little bit of fine tuning occasionally due to my amateur mechanics
I've been looking to put a 36 on the rear too. Ive got SRAM Force and have been looking around for a slightly longer mech hanger.. I might try smaller jockey wheels too.
Any other interest? Or views
Bump for the Gnarmac lot?
[url= https://classifieds.bike/bicycles/wide-range-gearing-kits-for-road-touring-or-gravel-bikes-from-lindarets-new-rocks-belong-tees-more/ ]This RD link?[/url]
Bit more info on the road goatlink here...
My short cage ultegra di2 mech seems to work on a 32t cassette ok (1x11) so presume maybe the road/goatlink might just make 36t ok.
Another option is a change of cage length, noted that fibre-lyte seem to have a few carbon replacement options.
Interesting