Road HTII bottom br...
 

[Closed] Road HTII bottom brackets - how long do they last for you?

Posts: 2617
Full Member
Topic starter
 

My commuter (which is used for a 5ish mile each way commute most days of the week) has Tiagra HTII cranks and a Shimano HTII BB - probably Ultegra or Dura Ace. I seem to be wearing out the BBs in just under a year or so. Is that a typical lifespan for these BBs on the road? Are there any road HTII compatible alternative BBs that I should consider?


 
Posted : 29/04/2010 12:38 pm
Posts: 251
Full Member
 

I got one winter out of a dura ace bb.


 
Posted : 29/04/2010 12:41 pm
Posts: 71
Free Member
 

I've had 4 years out of a Dura Ace bb, I went to remove the cranks a few months ago, as it's gone a bit gritty, and the end cap thingy has seized in, I wish they lasted less time...

Had the Tiagra one in my commuter bike nearly 18 months and that's still fine.


 
Posted : 29/04/2010 12:43 pm
Posts: 2617
Full Member
Topic starter
 

My commuter's BB is definitely making lots of creaking noises so I don't think it's healthy. I definitely remember changing it last summer or thereabouts. I may take it to an LBS and get its BB shell faced, just in case Kona didn't bother to do so when they built the bike.


 
Posted : 29/04/2010 12:49 pm
Posts: 0
Free Member
 

The one on my commuter, which is a superstar, lasts about 6 months which is around 3000 miles. Not bad for £20.


 
Posted : 29/04/2010 12:54 pm
Posts: 0
Free Member
 

I do about 100 miles/week and usually get about a year out of a BB. I've had Superstar and Shimano, both seem about the same in use.


 
Posted : 29/04/2010 12:55 pm
 nbt
Posts: 12469
Full Member
 

I've the same Tiagra HTII set-up on the CX bike I used for commuting, I cover an average of 40 miles a week on it and a fair bit of that (40%) is off road. It's 18months old and seems fine (frantically touches wood)


 
Posted : 29/04/2010 12:56 pm
Posts: 0
Free Member
 

I get about 6 months, but use the road bike in all weathers. Frankly I think the Shimano ones are a very poor piece of design. In the past used old cartridge BB for years on Cross bikes, I am probably going back to them even with the expense of a new crank. Also trying the wheels manufacturer version of the HT11 but i don't hold out much hope....


 
Posted : 29/04/2010 1:40 pm
Posts: 0
Free Member
 

100 miles a week - current Ultegra one is about to die after just about 3 years.


 
Posted : 29/04/2010 1:42 pm
Posts: 14774
Free Member
 

First one lasted 2 years. My SSC one lasted about 6 rides, but I did leave it wet. I'll have to open it up and try to find the cause.


 
Posted : 29/04/2010 1:45 pm
Posts: 0
Free Member
 

[i]My SSC one lasted about 6 rides, but I did leave it wet.[/i]

I don't normally dry my bike after a wet commute, you must have fitted incorrectly.


 
Posted : 29/04/2010 1:49 pm