Hi can anyone tell me which bearings I need for the rear Novatec hub on a 2017 Arkose X. The rear wheel has suddenly developed a load of play which I assume is a cartridge bearing gone......the wheels have 700c Alexrims if that helps place them.
I've tried to trawl through the huge Arkose thread but that is impossible.
Thanks
Rob
JOYTECH D522GCC Cup and cone
According to my list
No they are definitely cartridge. The front hub are loose balls and the rear hub have a cartridge pressed in, on the non drive side at least
Odd. 2017? The code in BOM and the spares sheet is for D522GCC and 'GCC' stands for Ground Cup and Cone. I don't remember any mid year changes but it's going back a few years now.
https://issuu.com/novatecwheels/docs/novatec_hubs_guide_2014/15 - lower right P15
You should be able to pop the end caps off and see the code on the seal.
Hub is a D482TSBT and on the non drive side there is a 6000RS
Cant check the other side as have busted rib and a chain whip is too much for me at the moment!
Cant find that hub number in the pdf..
D482TSBT is sealed bearing spec, bearings are 6000RS both sides
https://www.novatecusa.net/product/d482tsbt-11s/
Thanks Jameso. At least I can order some new ones to fit when I'm fit!