PSA Dt Swiss wheels...
 

[Closed] PSA Dt Swiss wheels?

Posts: 4787
Full Member
Topic starter
 

Not sure if it's been done before...Are the spline wheels any good?

https://www.planetx.co.uk/c/q/wheels/mountain-bike-wheels


 
Posted : 04/10/2019 1:22 pm
Posts: 4085
Full Member
 

Bit of a bargain on the face of it, but only a 23mm inner rim width.


 
Posted : 04/10/2019 1:30 pm
Posts: 4787
Full Member
Topic starter
 

Yeah saw they were the 'non trendy old school' width 🙂


 
Posted : 04/10/2019 1:40 pm
Posts: 166
Free Member
 

Cheers for the psa. They'll do nicely for the gravel bike.


 
Posted : 04/10/2019 2:54 pm
Posts: 134
Full Member
 

Gah - was about to pull the trigger for the gravel bike, then noticed they're boost. Bugger.


 
Posted : 04/10/2019 4:07 pm
Posts: 28592
Free Member
 

I picked up a front X1900 for 25 quid or so from Wiggle a while back, it's well put together, not that heavy.


 
Posted : 04/10/2019 4:16 pm
Posts: 13850
Free Member
 

manmurray

Gah – was about to pull the trigger for the gravel bike, then noticed they’re boost. Bugger.

? None of the ones I'm looking at are boost.


 
Posted : 04/10/2019 6:41 pm
Posts: 0
Full Member
 

the 27.5 is boost


 
Posted : 04/10/2019 6:49 pm
Posts: 5164
Free Member
 

The X are boost, the M are non boost, nice wheels for the price, i just picked up some M1700s for a good price and they are perfect as a second set, which unfortunately these days are a necessity due to tubeless!

The other wheels i have are the FFWD Outlaws which are also on offer, good price as they're DT240s on carbon rims, light as and 30mm internal.


 
Posted : 04/10/2019 7:23 pm
Posts: 4787
Full Member
Topic starter
 

It says they're 350 hubs?


 
Posted : 04/10/2019 9:50 pm
Posts: 420
Free Member
 

1700 series are great wheels with 350 hubs.
1900 series have garbage 370 hubs. Don’t waste your money (unless u only need a front wheel, in which case a 370 is ok).


 
Posted : 06/10/2019 1:50 pm
Posts: 4787
Full Member
Topic starter
 

Oops just ordered a set!


 
Posted : 06/10/2019 10:46 pm