Forum menu
Places to service F...
 

[Closed] Places to service Fox forks recommend? (alternatives to Mojo & TF)

 hora
Posts: 0
Free Member
Topic starter
 
[#2405281]

Basically I think a service for £100 is abit steep.

Any recommendations based on experience etc?


 
Posted : 26/01/2011 2:27 pm
Posts: 3775
Free Member
 

Loco?
but I just go to Dale at Sherwood Pines Cycles - £60/65 for shock or fork


 
Posted : 26/01/2011 2:28 pm
Posts: 0
Free Member
 

http://www.pedals-edinburgh.com/

no complaints here - just got my floats back after a service and travel reduction


 
Posted : 26/01/2011 2:30 pm
 LoCo
Posts: 0
Free Member
 

Drop me a mail with what needs doing and I can quote you.
All I do is suspension and nothing else, so the workshop is specifically setup for dealing supension units with all the correct tools and best quality fluids, seals e.t.c


 
Posted : 26/01/2011 2:53 pm
 hora
Posts: 0
Free Member
Topic starter
 

The forks only cost me £350. Seems daft to spend £100 servicing them.

Loco- It'd still come out around £100 when you throw in postage both ways.


 
Posted : 26/01/2011 3:28 pm
Posts: 0
Free Member
 

Do it yourself for about £60 (seals, washers, cleaners, oils/lubricants, tools). It'll be cheaper in future because you'll have the tools and the oils left over.


 
Posted : 26/01/2011 3:34 pm
 LoCo
Posts: 0
Free Member
 

I tried 😀 If you need parts give me a shout 😉


 
Posted : 26/01/2011 3:37 pm
 hora
Posts: 0
Free Member
Topic starter
 

I did this last Friday and overfilled the damper thus meant me having to compensate but dropping the air psi. Im sure in part it led to me flipping over the bars onto my knee!

I'm reasonably intelligent however I have zero patience.


 
Posted : 26/01/2011 3:38 pm
 Kit
Posts: 24
Free Member
 

Set up your own LBS in your living room so you don't have to travel 20yds to the nearest one, get a competent mechanic at minimum wage, then charge yourself less than the time it would take said mechanic to do the work, thus losing yourself money but hey you'd be able to have a good chat with yourself and make yourself a cup of tea and you'd lock up at the end of the night being one more satisfied customer because you run such an honest and great LBS!

Bosh!


 
Posted : 26/01/2011 3:39 pm
 hora
Posts: 0
Free Member
Topic starter
 

Kit, I need more working capital from you.

We aint taking over the world with £10.


 
Posted : 26/01/2011 3:41 pm
Posts: 14707
Free Member
 

The forks only cost me £350. Seems daft to spend £100 servicing them.

Uuugh? Do what? Are you saying you got the forks cheap but service them will no longer make them a bargain?
Yet you expect a decent life expectancy & performance from them 2nd hand without a service?

Mods please change of title please "Hora living up to his STW rep."


 
Posted : 26/01/2011 3:42 pm
Posts: 16
Free Member
 

(I'm reasonably intelligent) 😯


 
Posted : 26/01/2011 3:45 pm
 hora
Posts: 0
Free Member
Topic starter
 

So your saying £100 for a general service is cheap?

We aint even talking adding in bushing costs either.


 
Posted : 26/01/2011 3:46 pm
Posts: 0
Free Member
 

I did this last Friday and overfilled the damper thus meant me having to compensate but dropping the air psi. Im sure in part it led to me flipping over the bars onto my knee!

Suddenly the reason becomes clear for paying qualified persons to do something for you. Not all costs can be quantified.


 
Posted : 26/01/2011 3:46 pm
Posts: 14707
Free Member
 

[i]So your saying £100 for a general service is cheap?[/I]

(assume you post is to mine) Nope, but if when I buy 2nd hand I take into account that they might need servicing, and so the price I am willing to pay reflects this. So if push does come to shove, my bargain is still a bargain...


 
Posted : 26/01/2011 3:55 pm
Posts: 0
Free Member
 

Got my forks and rear shock serviced from the bike chain just before christmas, can't remember what I paid but I was pleasantly surprised with the bill.


 
Posted : 26/01/2011 4:03 pm
Posts: 9
Free Member
 

Learn how to do it properly and you'll be able to spend £450 on your forks next time. Muppet!


 
Posted : 26/01/2011 4:08 pm
 hora
Posts: 0
Free Member
Topic starter
 

Madness. How people into mountain biking have a 'no fear' approach to big bills.

Would you see this mentality in the roadie world?!


 
Posted : 26/01/2011 4:12 pm
Posts: 0
Free Member
 

[url= http://www.evanscycles.com/servicing/suspension-servicing ]null[/url]

Not that I buy anything else from them but the fork service has been fine and has free shipping if you can get to store (they send it to their service centre!).


 
Posted : 26/01/2011 4:15 pm
 LoCo
Posts: 0
Free Member
 

Just a note the Evans rear shock 'service' is an air can service and seals only.


 
Posted : 26/01/2011 4:31 pm
Posts: 251
Full Member
 

[i]How people into mountain biking have a 'no fear' approach to big bills.[/i]

I fear no pelican.

Maybe if you bought new, planned to keep stuff for a while and factored £100/year running costs in it wouldn;t seem so expensive?


 
Posted : 26/01/2011 4:34 pm
Posts: 0
Free Member
 

http://www.chippingcycles.webs.com/

Any help?


 
Posted : 26/01/2011 4:38 pm
Posts: 25941
Full Member
 

I fear no pelican.
😀


 
Posted : 26/01/2011 4:39 pm
 hora
Posts: 0
Free Member
Topic starter
 

Maybe if you bought new, planned to keep stuff for a while

Like the numerous new Rockshox forks I had break on me? 🙄

Maybe if you bought new, planned to keep stuff for a while and factored £100/year running costs in it wouldn;t seem so expensive?

You are right. Spend alittle extra time on them and sort them myself. I ended up rushing the oil refill on them as I couldn't find the funnel and ended up over-topping the night before the ride.

£100 I'd rather pay myself to do that for circa 40mins work. Plus I've got the spare wiper and seals kit already that came with the forks from the lad who only owned them for less than a month.


 
Posted : 26/01/2011 4:40 pm
 anjs
Posts: 0
Free Member
 

yes the cheap deals on shocks just look like air can service to me


 
Posted : 26/01/2011 4:44 pm
 LoCo
Posts: 0
Free Member
 

Use a big syringe, it more accurate, mail me and I'll send you one if you like (F.O.C of course) 😀

edit, yes and the air seal kit is £9.49 plus postage, easy job that takes 10 mins.


 
Posted : 26/01/2011 4:46 pm
 jonb
Posts: 0
Free Member
 

Are instructions for fox services avalaible anywhere? I've got an shock and fork to do.


 
Posted : 26/01/2011 5:02 pm
Posts: 0
Free Member
 

Knock yourself out...

http://service.foxracingshox.com/consumers/Content/index.htm


 
Posted : 26/01/2011 5:09 pm
 LoCo
Posts: 0
Free Member
 

jonb:

there you go: http://service.foxracingshox.com/consumers/index.htm

Edit: damn you and your Fish 😀


 
Posted : 26/01/2011 5:09 pm
Posts: 2522
Free Member
 

Loco - you refer to Evans as air can only - what do I get for my £55 off you? I've never even tried servicing any suspension so have no idea but my RP23 could do with some tlc


 
Posted : 26/01/2011 5:15 pm
 LoCo
Posts: 0
Free Member
 

Yoshi:

That's a full strip, clean, inspection and rectification of any manufacturing defects. All seals in the damper are replaced and the unit has the oil and gas replaced. The air seals are also replaced as are the eyelet bushes. If spacer are needed they would be a little extra.
I don't like replacing stuff just for the sake of it, if they're going to last another 12 months then why should you have to pay for it.
Postage back is extra


 
Posted : 26/01/2011 5:22 pm
Posts: 0
Free Member
 

My money is that hora didn't empty the damper fully, and this has put the total oil level too high. Schoolboy error.


 
Posted : 26/01/2011 5:36 pm
 gamo
Posts: 0
Full Member
 

[url] http://www.flotecsuspension.co.uk/home.aspx [/url]
Fairly new company, but good!


 
Posted : 26/01/2011 5:55 pm
 erny
Posts: 0
Free Member
 

Bike treks are running fox servicing courses,i'm booked on the 20th of feb


 
Posted : 26/01/2011 6:03 pm
 LoCo
Posts: 0
Free Member
 

Flotec, are charging for a clean, oil change and greasing the seals, wipers are extra.

If people are interested I'd be happy to do an evening course on servicing of forks.


 
Posted : 26/01/2011 6:10 pm
Posts: 0
Free Member
 

I think stendec service fox bits.


 
Posted : 26/01/2011 6:11 pm
Posts: 1293
Full Member
 

Hi LoCo,

Well I'd be interested in an evening class.

Regards
Marko


 
Posted : 26/01/2011 6:44 pm
 wors
Posts: 3796
Full Member
 

Not had anything serviced, but just bought some sektors from simon (LoCo). Sound chap.


 
Posted : 26/01/2011 7:03 pm
 LoCo
Posts: 0
Free Member
 

Marko, ok cool I'll have a work out and see what we can do.

Edit, Hora I was serious about the syringe, it wasn't some random mic taking 😀


 
Posted : 26/01/2011 7:09 pm
Posts: 0
Free Member
 

Loco I and I know a few other lads would definately be interested in an evening class for sure all of us pretty local to you too, Aberdare/Neath/Swansea Valley/Beacons 😉

It would be a good way for you to introduce us to the benefits of fork servicing - plus I am sure you would get sure fire loyalty to a local lad 😯


 
Posted : 26/01/2011 7:15 pm
 LoCo
Posts: 0
Free Member
 

Valley, you know I'm not 'local' 😯 but have been in the valleys quite a few years now and support the reds in the rugby.

Let me see when I've got a bit of time free, in the meantime if you have a few mates that are interested get numbers and mail me, should be able to do something next month sometime, so people could bring forks and beer...

yeah! second page!


 
Posted : 26/01/2011 7:22 pm
 hora
Posts: 0
Free Member
Topic starter
 

Scottegg I did. The issue was I didn't have the correct impliment to inject the new oil in - had to use a large glass cooking measuring jug


 
Posted : 26/01/2011 7:23 pm
Posts: 0
Free Member
 

Loco that would be awesome 😀

ok I'll find a motley crew and let you know, you many folk do you think would be ok 5-7???

beer and forks = bomber time 😯

as for "local" your a local trader that's all that matters plus we like supporting the "little" guys (in comparison to the "big" guys if you follow me) 😉


 
Posted : 26/01/2011 7:32 pm
 LoCo
Posts: 0
Free Member
 

No problems, I reckon 8 max per visit would be ok. If you can let me know numbers and what forks people want to know about/are bringing would be good.


 
Posted : 26/01/2011 7:36 pm
Posts: 0
Free Member
 

ok magic, I'll ask some fellas, we've probably got a mix of Fox/RS mainly 32's mix of Talas/Floats/Revs off the top of my head 😀

I'll email you later and we can go from there


 
Posted : 26/01/2011 7:48 pm
Page 1 / 2