Topic starter
[IMG] 
[/IMG]
It might work perfect on a tourer or cross bike - as designed, try fitting it to a 13" midget frame and it is way too long. Any suggestions how it could shorten this by about half?
Current thoughts are to twist half way down and fold over. Should I heat up wire first?
Posted : 03/08/2010 9:30 pm
like this
[img] 
[/img]
Posted : 03/08/2010 9:33 pm
and definately get some heat on there
Posted : 03/08/2010 9:33 pm
Could you cut it at the top and then bend the new ends over
Posted : 03/08/2010 9:40 pm
surlys used to come with a shorter canti hanger. not sure how much (my crosscheck isn't handy), but would swap for my lightly used* one.
* well, six year old.
Posted : 03/08/2010 9:43 pm
Topic starter
Yes jonb, but not sure if bent ends will have enough strength to hold the brakes. Could use epoxy metal to bond.
Posted : 03/08/2010 9:47 pm