Forum menu
Made the mistake of having a go on a mate's Yeti 575 at the weekend. I couldn't believe how lovely and stiff and lively it felt, downhill and up.
Can anyone think of a good reason for me not to immediately retire my creaking old Enduro and get the credit card out?
And would anyone raise an eyebrow if I put my 145-165mm adjustable fork on the front of the Yeti?
1.65 metres is probably a bit too much travel for a Yeti 575?
[edit] beaten by your edit!
yes try an Orange 5 and be totally blown away 8)
my mates ellesworth moment has a very similar effect on any test riders and that has 36 Talas up front...
1.65 metres is probably a bit too much travel for a Yeti 575?
Edited out but yes, 1.655m would be a touch slack...
Would the SB-66 not be a better choice for that much fork?
yes try an Orange 5 and be totally blown away
Now now, this was supposed to be a serious topic...
I think it depends what I want out of the bike. I can't see the SB-66 being quite as sprightly. Or available in a shop 2 miles away from my house at this moment.
Good point.
[b]GO BUY ONE NOW,QUICK BEFORE THEY SHUT AND YOU CHANGE YOUR MIND.[/b] 😉
Or, for the cheapskates - get your own bike serviced properly ??
Wait a bit and the prices will drop once the SB-66 is more readily available.
Or, for the cheapskates - get your own bike serviced properly ??
Not that I need to justify anything, but the old bike has been well WELL loved. The headtube is a bit oval shaped, as are some of the bearing housings, the downtube is covered in dents, there are scuffed/worn patches of metal covered in electrical tape. In short, it's in precisely the state a properly-used bike should be. 😛
patches of metal covered in electrical tape
Is that a structural repair? 😀
what rickos said, except then wait a bit more till the SB66 is cheaper too, then get that.
No. Get a Ventana instead.
And a tweed cape & deerstalker to complete your transformation into a gentlemen of standing.
Buy one if you want to experience what a collapsing rear triangle feels like as you're hammering down your fave bit of knarly trail(it hurts)
Daznal - what year frame was that? The 2011 is alu chainstays with carbon seatstays, probably for exactly that reason.
2009 they have a bit of a rep for parting company at the joint between the seatstay and the chainstay
Give it a go, hope it don't snap on ya
Mine has been fine so far, late 2009 frame. Not riding as much as I used to but when I do I like hitting stuff..
Make sure the back brake is faced and fitted properly tho as it yelps like a bitch unless it's on straight..
Cracking bike. Replaced my well ridden enduro.. Go for it!
my mate has a carbon rear triangle jobbie, he flies on it, hounding dh boys all day. I'm waiting for the day when I come round a corner and find the debris from a rear end explosion. But it hasnt happened yet after years of thrashing, he is more gnarr than david taylforth/juan/gw put together..
patches of metal covered in electrical tapeIs that a structural repair?
Nah, cynic-al was having a go at bodging it together...
Done. Awaiting call from bank manager...
but have you demoed the Orange 5 yet 😉
Buy it if you can afford for it to last as well as your current bike
I think replacing something that you've worn out is a guilt free pleasure (as opposed to buying a new bike because you need a new colour scheme, following a new thrend etc.)
What year enduro have you got?
I've got a creaking old enduro (2005 model), and am wondering if now is the time to replace it, it still rides well though, I tried a 2010 enduro and mine felt nearly a good.
My Enduro was an 06. Ridden it all over the place. Trail centres, DH uplift days, up and down Snowdon, 2 x Megavalanche weeks and one Passportes. I will be sad to see it go.
Don't know if I missed something with the editing going on but .165m surely .