Hope pro 2 evo hub ...
 

[Closed] Hope pro 2 evo hub knackered?

Posts: 4472
Full Member
Topic starter
 

So having a look at my bearings last night and ive noticed that one of the pawls is loose in its hole. Swapped them round and it seems that the hole its in has got slightly bigger.

Hub scrap?


 
Posted : 21/08/2017 10:13 am
Posts: 8830
Full Member
 

New freehub time


 
Posted : 21/08/2017 10:16 am
Posts: 0
Free Member
 

As above you can replace the freehub for £60 or something.


 
Posted : 21/08/2017 10:26 am
Posts: 4472
Full Member
Topic starter
 

will i die if i run it?


 
Posted : 21/08/2017 10:32 am
Posts: 19914
Free Member
 

You will certainly die yes.
Maybe not because of your hub, but you will die.


 
Posted : 21/08/2017 11:03 am
Posts: 4472
Full Member
Topic starter
 

basically do i need to drop the 60 quid on it or can i run it as is?


 
Posted : 21/08/2017 11:14 am
 RicB
Posts: 1540
Free Member
 

Take out the dodgy pawl and run it with three- you'll be fine unless you have froome like leg power


 
Posted : 21/08/2017 11:30 am
Posts: 4472
Full Member
Topic starter
 

is the stainless one worth it over the alloy one?


 
Posted : 21/08/2017 2:04 pm
Posts: 8527
Free Member
 

Yes.


 
Posted : 21/08/2017 2:05 pm
Posts: 2320
Free Member
 

will be heavier but last longer...


 
Posted : 21/08/2017 2:08 pm
Posts: 66083
Full Member
 

Back in the old days absolutely everyone had at least one broken pawl spring (while telling all their mates how bombproof Hope are) so don't stress. If it works fine as is just leave it in and forget about it, if it's causing problems take it out and run on 3 and forget about it, in either case make sure to tell all your mates how bombproof Hope are, I wouldn't spend a penny on it though if I was you!


 
Posted : 21/08/2017 2:12 pm