Forum menu
[Closed] Has this been done yet? 2x10 Di2 MTB!
Maybe this is old news but I came across this today and for cutting edge XC I haven't seen better. Sure it probably wouldn't last a day in the UKs winter sludge but it certainly looks pretty 8)
2x10 Di2, carbon disks and chain rings, cool paint job, single sided fork (no idea what make? anyone??), etc etc.......
From here: http://fairwheelbikes.com/forum/viewtopic.php?f=49&t=6614
[img] http://fairwheelbikes.com/forum/download/file.php?id=7236&sid=6697a29a4859a867e5b2b890e8442ca2&mode=view [/img]
[img] http://fairwheelbikes.com/forum/download/file.php?id=7237&sid=6697a29a4859a867e5b2b890e8442ca2&mode=view [/img]
[img] http://fairwheelbikes.com/forum/download/file.php?id=7239&sid=6697a29a4859a867e5b2b890e8442ca2&mode=view [/img]
[img] http://fairwheelbikes.com/forum/download/file.php?id=7243&sid=6697a29a4859a867e5b2b890e8442ca2&mode=view [/img]
[img] http://fairwheelbikes.com/forum/download/file.php?id=7249&sid=6697a29a4859a867e5b2b890e8442ca2&mode=view [/img]
The fork is a USE Sub anti-dive
Stupid bike, I could break that in 20 mins.
I'm more worried about the carbon handlebar drilled for the hoses!
It's done by the guys at Fairwheel bikes in the US, mainly to prove a point, rather than anything else. I like the Di2 MTB thing, less keen on the rest of the spec.
Its purdy. I like the schematic effect on the frame.
I hate the schematics on the frame!
I'm more worried about the carbon handlebar drilled for the hoses!
Well assuming it's designed for the hole, then it should be fine - I imagine that it's not drilled but rather the fibres spread to create the hole.
"I could break that in 20 mins"
but lots of people could ride it for years and not break it.
depends what you ride and how your ride really.
Second the fork its a USE one, iirc they don't make them any more?
Quite like the schematic paintjob, reminds me of the BMW touring cars
Regarding the bars and the holes - for Interbike yes the holes were drilled in the bars... BUT since Interbike Edge have special made a set of bars with holes already in them with a bit of reinforcement etc.