Topic starter
Taken my fork off and the lower bearing on my headset feels pretty gritty and un-smooth when I turn it with my finger.
At what point should it be replaced?
Posted : 21/01/2009 3:12 pm
You could try flushing it with some diesel/oil/wd40/etc
But if it's got as far as being gritty chances are it'll never be great.
Depending on which headset it is, you may be able to buy just one bearing.
Posted : 21/01/2009 3:14 pm
erm...Now?
If it's a loose ball (oo-er) you might get a wee while more out of it but flushing all the old muck out and putting some fresh grease in, but if it's a cartridge one, probably best to just change it.
Posted : 21/01/2009 3:14 pm
Topic starter
just been to have a look at it and I can't move it at all with my fingers now! Looks like I need a new one which is a shamae as the top bearing's fine. It was a Cane Creek.
Posted : 21/01/2009 4:04 pm