Fox Float 32.. what...
 

[Closed] Fox Float 32.. whats a good pressure..

Posts: 2677
Full Member
Topic starter
 

.. for me!

about 13/13.5 stone with pack on. I've got it at about 90 psi at the mo. Not had an air sprung fork before so any real world experience welcome

Ta
Martyn


 
Posted : 31/10/2012 2:11 pm
Posts: 0
Free Member
 

Ride it...feels too soft,put more air in.Feels too hard,let some out.Simples.


 
Posted : 31/10/2012 2:13 pm
Posts: 0
Free Member
 

Don't measure the pressure, measure the sag that you get on the fork when you are standing up on the bike in an 'attack' position.

Typical sag settings range between 20 - 33% of total fork travel, depending on personal preference and riding type


 
Posted : 31/10/2012 2:14 pm
Posts: 0
Free Member
 

Sag, it's all about the sag.


 
Posted : 31/10/2012 2:23 pm
Posts: 9
Free Member
 

As above, set the sag, then play around with the pressure until it feels ok. 5psi increments up or down once the sag has been set.
Im about 16.5st and I have 85psi in my 140mm Float 32s.


 
Posted : 31/10/2012 2:57 pm
 LoCo
Posts: 0
Free Member
 

http://locotuning.co.uk/forks-sag.html ๐Ÿ˜€


 
Posted : 31/10/2012 4:03 pm
 IHN
Posts: 20093
Full Member
 

[i]about 13/13.5 stone with pack on[/i]

Only when you breathe in ๐Ÿ˜‰


 
Posted : 31/10/2012 4:36 pm