Fitting a wahoo com...
 

[Closed] Fitting a wahoo computer to a garmin mount?

10 Posts
9 Users
0 Reactions
1,999 Views
Posts: 8188
Free Member
Topic starter
 

My piece of shit garmin 810 is playing up again, and rather than give that company another penny for their useless products I’d prefer to look elsewhere

The obvious choice is a wahoo, the only issue is I currently have 6 bikes all with garmin out front mounts. I know you can get adapters so the wahoo can fit a garmin mount but do I need to buy 6 of them, or I I buy just one adapter will it be easy enough to switch between bikes?


 
Posted : 19/06/2021 4:15 pm
Posts: 1732
Full Member
 

They fit, you just have to rotate the locking mechanism 90°, I didn't need an adaptor.


 
Posted : 19/06/2021 4:24 pm
Posts: 4605
Full Member
 

Yep, reused all of my garmin mounts for my wahoo that could be rotated. Some were tighter than others so shaving a sliver off one side of a notch is enough to fix it.


 
Posted : 19/06/2021 4:30 pm
Posts: 8188
Free Member
Topic starter
 

My mounts aren’t official garmin ones so you can’t rotate anything

Unless you mean there is something you can rotate on the wahoo unit?


 
Posted : 19/06/2021 4:31 pm
 Bez
Posts: 7386
Full Member
 

If it’s an out-front style mount you’ll need it to be one of the ones where the quarter turn piece can be unscrewed and refitted at 90 degrees. If it’s a completely fixed mount then it won’t work.

If it’s a rubber band style you just take it off and refit it, of course.


 
Posted : 19/06/2021 4:34 pm
Posts: 1732
Full Member
 

All of our various mounts have had a small screw in them that you can undo and rotate the mechanism, assumed they all do as we have various makes and models of mounts and they all still work.


 
Posted : 19/06/2021 4:43 pm
Posts: 3783
Free Member
 

As above, should be bolted in.

If it can't, you buy an adapter to go into the mount that makes it a wahoo mount.

I just rotated mine and cut a sliver off


 
Posted : 19/06/2021 7:56 pm
Posts: 0
Free Member
 

Elemnt bolt v2 wouldn't fit a rotatable garmin mount.... oh and I wouldn't advise buying one anyway... Read the reviews!


 
Posted : 20/06/2021 10:40 am
Posts: 11511
Free Member
 

If you can't rotate the insert, you can get 3d printed adaptors on eBay.

I expect quality varies so I'd try one or two rather than splurging on 6... Unless the postage makes it sensible to go for several.


 
Posted : 20/06/2021 12:40 pm
 aP
Posts: 681
Free Member
 

You can buy wahoo inserts relatively cheaply. I found that rotated Garmin mounts weren't reliable enough and had a tendency to eject my wahoo.


 
Posted : 20/06/2021 1:54 pm
Posts: 10487
Free Member
 

Go to this here eBay shop and buy the appropriate adapter that will allow you to use your Wahoo of choice to your plethora of Garmin style mounts, it's what I did.


 
Posted : 21/06/2021 2:01 pm