Topic starter
I've just fitted some enduro fork seals to my Fox TALAS and had a nightmare of a time getting one of the wipers fitted, I followed the fitting guide to the letter but it just kept popping out.
Has anyone else had similar issues?
Posted : 16/09/2011 9:42 pm
Did you 'shrink' them in the freezer first? They are tough otherwise.
Posted : 16/09/2011 10:14 pm
Topic starter
I'll try the freezer trick next time, thanks for the tip.
Posted : 17/09/2011 10:47 am
Pretty easy here, used a socket and a wee bit of super slick grease to press them on.
Posted : 17/09/2011 10:52 am
Pretty easy here, used a socket and a wee bit of super slick grease to press them on.
+1
Posted : 17/09/2011 11:03 am
Topic starter
that's odd because mine pressed in OK (using slick honey grease) but it just kept popping out again. As far as I could see the wiper was in all the way.
Posted : 17/09/2011 2:26 pm
Possible issue with the depth of the machining on the top of your lowers perhaps. Few folk over in the states had issues due to this, have a looky on mtbr.
Posted : 17/09/2011 2:50 pm