Cube Attain Sizing ...
 

[Closed] Cube Attain Sizing Advice

Posts: 0
Free Member
Topic starter
 

I've been looking at the Cube Attain GTC Pro Disc at Paul's Cycles.

I'm struggling a bit with sizes, due to my proportions. I'm just under 5'10" so 177cm, with a 29" inside leg. I'm looking at 53cm or 56cm. I currently have an Arkose in a 56cm, which is good if potentially a few mm too long. The smaller size Arkose felt a little short at the time.

The 53cm Cube is similar in ett and reach to the Arkose, but with a slightly increased drop from saddle to bars. I'm thinking the 53cm sounds right, but not sure.

It'll be for rides to 80km max, but mainly 40km training.


 
Posted : 03/01/2017 3:12 pm
Posts: 0
Free Member
 

Hi mcnultycop

I'm 5ft 10" and ride a 56cm Cube Attain that I picked up a few weeks ago.

I ride a 54cm Cannondale and 54cm Kinesis if that helps.


 
Posted : 03/01/2017 3:29 pm
Posts: 0
Free Member
Topic starter
 

Burnsybhoy are you in proportion as my legs are short!


 
Posted : 03/01/2017 3:35 pm
Posts: 0
Free Member
 

My inside leg is 82cm.


 
Posted : 03/01/2017 3:52 pm
Posts: 0
Free Member
 

I can't help on size, but thanks for the heads up that they have them. I've been looking at the Alu version on CRC for ages and this is nearly £100 cheaper than CRC 🙂


 
Posted : 03/01/2017 4:06 pm
Posts: 0
Free Member
Topic starter
 

Cheers BB, bit longer than me!


 
Posted : 03/01/2017 4:24 pm
Posts: 92
Full Member
 

I'm 5'10" but with longish arms. I ride the 58cm frame Attain with seat post on its lowest setting. My bike shop told me that Cube tend to size small. So I wonder whether that 53cm might be a bit small for you?


 
Posted : 03/01/2017 4:31 pm
Posts: 0
Free Member
 

your leg kinda too short, im 5ft 6" ..29" legs..fits attain in small... 49 frame in allez....51 frame in Synapse (but wish I get the 48 :?) ..HTH sizing in paper is weird, best to fit


 
Posted : 03/01/2017 5:29 pm
Posts: 852
Free Member
 

I have an Attain with a 53cm frame, i am 5'6" with 29" inside leg and it fits me perfectly, I live close to Pauls so I did get to try the frame sizes out.


 
Posted : 03/01/2017 6:29 pm
Posts: 0
Free Member
 

5'10 and a bit with 30" inside leg.

56cm Cube Attain GTC Pro Disc and feels just right.

The Cube mudguards are a good addition too.


 
Posted : 03/01/2017 10:06 pm
Posts: 0
Free Member
Topic starter
 

I managed to throw my leg over a 56cm Attain today in a shop (where I bought something I didn't need to alleviate my guilt for not buying the bike from them, even though I have bought lots of stuff off them before and they didn't even have the exact same model).

Whilst my gut previously said the 53cm was right as soon as I got on the 56cm it felt perfect. The 53cm would have been much too far a drop to the bars for me (some 30mm less stack I think) - they had a 53cm in another Cube bike and it looked tiny.

Ordered today.


 
Posted : 06/01/2017 3:17 pm
Posts: 0
Free Member
 

I ordered one of these last week aswell,built up and looked awesome until I realised they had sent me the wrong size! So had to unbuild and send back just waiting on the new one now.
I ordered a 56 but they sent me a 60....


 
Posted : 06/01/2017 7:02 pm
Posts: 0
Free Member
Topic starter
 

I'll check first!


 
Posted : 06/01/2017 8:47 pm
Posts: 0
Free Member
 

Haha yeah do ,they've been great about it tbf but no freebies yet!


 
Posted : 06/01/2017 10:04 pm
Posts: 0
Free Member
Topic starter
 

It went up in price £60 the day after I ordered.

So glad I didn't hang around.


 
Posted : 08/01/2017 10:07 am