Cheap saddle for so...
 

[Closed] Cheap saddle for someone with big scrote? Recommendations?

Posts: 16447
Full Member
Topic starter
 

Its for the Zwift setup and I think I need something with a little LESS saddle in the scrote area?

Anything cheapish out there, about 143 width?

I know there will be some p*** taking here but a couple of helpful replies would be great too. ๐Ÿ˜€


 
Posted : 03/10/2017 12:26 am
Posts: 0
Free Member
 

That's a brave post!

Probably won't fit your 'cheapish' specification but is it worth going to an LBS that does that saddle fitting thing? Think Trek dealers do it


 
Posted : 03/10/2017 12:29 am
Posts: 0
Free Member
 

Yeah I can just imagine telling them the requirements. Especially face to face, as it were.

Just for the sake of being graphic; Is it the sack itself that's the problem or just behind it?


 
Posted : 03/10/2017 12:38 am
Posts: 1781
Free Member
 

Just for the sake of being graphic; Is it the sack itself that's the problem or just behind it?

What he means is: pics please.

This weird looking object would let it all hang loose

https://www.amazon.com/Hobson-Easyseat-Ergonomical-Bicycle-Saddle/dp/B000GBK4Z4


 
Posted : 03/10/2017 1:11 am
Posts: 0
Free Member
 

Yeah I wanted to ask for pics, I just didn't have the balls.


 
Posted : 03/10/2017 1:15 am
Posts: 16447
Full Member
Topic starter
 

lazlowoodbine - Member

Yeah I wanted to ask for pics, I just didn't have the balls.

Have to admit, that made me laugh! ๐Ÿ˜€

I think I have too large, erm, a ball/s size.

Getting back on track and after doing some Youtubing I think I need to get my sit bones measured on some corrugated cardboard (apparently that's the DIY solution)and go from there. I think both my current saddles might be too narrow thinking about it.

A wider saddle and a cutout might be the way to go.

Hmmm...

Got to find some cardboard tomorrow!

EDIT: Yeah, sack size is an issue. Those bad boys do take up some room even after I had the snip. Too much info?


 
Posted : 03/10/2017 1:20 am
 JoeG
Posts: 0
Full Member
 

Something like this? ๐Ÿ™‚

[img] [/img]


 
Posted : 03/10/2017 1:25 am
Posts: 16447
Full Member
Topic starter
 

^^ I WANT THAT CHAIR!!

Even allows for one ball being a bit looser in sack position.

Genius!

(The length of the V cutout at the front might be a little optimistic for me though.)


 
Posted : 03/10/2017 1:28 am
Posts: 0
Free Member
 

Bonus point for clocking The Final Countdown ringtone.


 
Posted : 03/10/2017 1:57 am
 JoeG
Posts: 0
Full Member
 


 
Posted : 03/10/2017 2:13 am
Posts: 21633
Full Member
 

A lot of female saddles focus on relief at the front, some of those might be worth a look.


 
Posted : 03/10/2017 6:19 am
Posts: 4972
Full Member
 

Is this the male equivalent of a flapjackie thread ๐Ÿ˜€


 
Posted : 03/10/2017 6:26 am
Posts: 1259
Free Member
 

Yeah I wanted to ask for pics, I just didn't have the balls.

So, completely unqualified to comment, then?


 
Posted : 03/10/2017 6:46 am
Posts: 2642
Free Member
 

Sackjacky?


 
Posted : 03/10/2017 7:48 am
Posts: 16447
Full Member
Topic starter
 

Well, after a lot of messing around trying to get my sit bone measurement (don't ask...) I am going to try the Specialized Toupe Sport and see how that feels. 155mm width so a fair bit wider than my current saddles. ๐Ÿ™‚


 
Posted : 04/10/2017 2:09 am
Posts: 513
Free Member
 

[img] [/img]


 
Posted : 04/10/2017 5:43 am
Posts: 0
Free Member
 

A lot of Specialized dealers (Evans particularly) have their Assometer,which they use to measure you with,worth a go if there's one local to you,other suggestions would be ISM which have a BIG cutout.


 
Posted : 04/10/2017 6:49 am
Posts: 24436
Full Member
 

Plenty of dangle room


 
Posted : 04/10/2017 6:55 am
Posts: 513
Free Member
 

Smp are very good though ugly and not cheap


 
Posted : 04/10/2017 7:49 am