Topic starter
Anyone know if I can fit Campag Ultra Torque cranks in a frame (Scott CR1 Pro 2010) that has the Shimano DuraAce press fit BB cups fitted?
Posted : 11/03/2010 11:15 am
You can but any mix of campag and shimano dissolves one another.
Posted : 11/03/2010 11:17 am
Is it BB30? If so I understand that Campagnolo make a BB30 bearing set for UT cranks.
Posted : 11/03/2010 11:39 am
Topic starter
This is the Shimano BB that is fitted:[url= http://techdocs.shimano.com/media/techdocs/content/cycle/SI/SI_0053A_001/SI_0053A_001_En_v1_m56577569830625426.pdf ]Shimano press fit BB[/url]
Looking at the Ribble website it seems Campag do their own press fit cups, used with their UT cranks, to fit these extra wide BB shells(86.5mm), so it looks like I'll have to drift out the Shimano ones. Hmmm, this could end it tears!
Posted : 11/03/2010 1:10 pm