Forum menu
Bottle cages
 

[Closed] Bottle cages

Posts: 4892
Free Member
Topic starter
 

After one that won't throw the bottles away...

Any thoughts?


 
Posted : 17/05/2011 8:27 am
Posts: 0
Free Member
 

I like the older Specialized Rib Cage with the rubber band, they seem pretty secure.
They don't do them any more though.

Sorry, that wasn't very helpful, was it ?


 
Posted : 17/05/2011 8:34 am
Posts: 4892
Free Member
Topic starter
 

a bit chocolate tea pot but thanks for the thought 🙂


 
Posted : 17/05/2011 8:39 am
Posts: 1193
Free Member
 

The 'standard' elite bottle cages work for me. They can be bent to make them more secure if you want too


 
Posted : 17/05/2011 8:39 am
Posts: 39706
Free Member
 

blackburn MTN cage are the best ive found

all the carbon/plastic ones ive tried end up baggy after a period of time - some better than others. bending em back doesnt work - they snap 😀


 
Posted : 17/05/2011 8:57 am
Posts: 0
Free Member
 

Ihave a selection of alloy ones and simply bend them in abit to make them more secure


 
Posted : 17/05/2011 8:58 am
Posts: 6678
Free Member
 

These

http://www.chainreactioncycles.com/Models.aspx?ModelID=37234

It also depends on the bottle, some of mine are loose some really tight.

If it's vital it stays in then wrap a couple of layers of electrical tape around just below where the cage meets the bottle. This makes it less likely to bounce out.


 
Posted : 17/05/2011 9:02 am
Posts: 0
Free Member
 

They do turn up on [url= http://shop.ebay.co.uk/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=specialized+rib*&_sacat=See-All-Categories ]ebay[/url] still though, even new ones.


 
Posted : 17/05/2011 9:05 am
Posts: 0
Free Member
 

Elite Patao for me - I've got ones that are 10 years old, still look and work like new.

The Elite Race Custom also work well (and contrary to trail_rat's experience, the 7 year old on on one of my mtbs is still working just fine)
http://www.wiggle.co.uk/elite-custom-race-bottle-cage/


 
Posted : 17/05/2011 9:05 am
Posts: 0
Free Member
 

I've been using those elite ones on my road bike, they hold bottles very well. Ran them once on the MTB, lost a bottle once in a crash, that was it.


 
Posted : 17/05/2011 9:07 am
Posts: 0
Free Member
 

I've always found plastic/composite cages will let a bottle go on rough ground. Alloy / stainless ones have always been fine.

Blackburn ones are pretty good and not expensive. Bikebuddy cages are very secure as the bottle is held in place with springs, you can also fit different sized bottles which may prove handy for you Matt.


 
Posted : 17/05/2011 9:29 am
Posts: 1
Free Member
 

Re: ribcage: there's a very similar topeak one with a little rubber bit. I got mine on crc for about £4. It is plastic and weighs a few grams more than a carbon one so probably not for weenies. 😀


 
Posted : 17/05/2011 9:30 am
Posts: 0
Free Member
 

I found the side entry ones better for the MTB

http://www.pedalon.co.uk/acatalog/_bontrager_side_entry_cage.html

http://www.chainreactioncycles.com/Models.aspx?ModelID=5652


 
Posted : 17/05/2011 9:39 am
Posts: 0
Free Member
 

Blackburn stainless has never let me down

http://www.chainreactioncycles.com/Models.aspx?ModelID=14131


 
Posted : 17/05/2011 9:50 am
Posts: 0
 

Tiger,

I have a few of the Bell aluminium cages with a rubber strap that clamps the bottle.
Adjustable for different size bottles.
Bought in the USA, but ot seen here or France.

I would gladly sell one if inetested.

paul.r.davisAThotmail.co.uk


 
Posted : 17/05/2011 10:32 am
Posts: 12
Free Member
 

Another vote for Elite - Ciussi for me. Have used them onroad, offroad and over the infernal cobbles of Flanders and yet to drop a bottle....

...except for the nice Camelbak Podium bottle I use for commuting, which has a tendency to release itself.


 
Posted : 17/05/2011 10:35 am
Posts: 4892
Free Member
Topic starter
 

Bought a couple of the Blackburns

Cheers all 🙂


 
Posted : 17/05/2011 10:46 am
Posts: 0
Free Member
 

I've had the Topeak ones and found the little rubber bit split after a while. The Specialized ones use a full circumference rubber band and it's a lot more durable.


 
Posted : 17/05/2011 11:30 am
Posts: 0
Free Member
 

I bought some plastic ones from tesco for my road bike. They seem to hold the bottles ok and were only a couple of quid.


 
Posted : 17/05/2011 11:34 am
Posts: 0
Free Member
 

Spesh "bog standard" (dunno the name) seems to work fine with bigger bottles (e.g Camelback Podium Chill) BUT bottles have a tendancy to foul against the shock and switch on the lockout half way down rocky descents... Now gone back to just a regular camelbak. Worth watching out for that if you're riding a full susser


 
Posted : 17/05/2011 12:21 pm
Posts: 79
Free Member
 

Specialized Rib Cage for the win - I've never lost a bottle out of one and I've used them for years.


 
Posted : 17/05/2011 12:53 pm
Posts: 0
Free Member
 

Tacx Tao, very secure.


 
Posted : 17/05/2011 12:56 pm
Posts: 0
Free Member
 

i use a tacx tao on the roadie, with camelbak bottles, but the torq bottles i have to use on the mtb are a little smaller in diameter, and rattle around, so i use an S-works carbon rib cage


 
Posted : 17/05/2011 12:58 pm
Posts: 0
Free Member
 

I have two red older design Spesh Rib cages (with the rubber bit) for sale as they no longer match my frame 🙂

Also might have two red Elite cages in red/white from jonba CRC link. Again no longer match my frame colour.

Email me if interested. I can swap for similar cages in black or grey (or a mix of those two colours).


 
Posted : 17/05/2011 1:36 pm
Posts: 791
Full Member
 

I use one of these [url= http://www.wiggle.co.uk/lifeline-alloy-bottle-cage/ ]Here[/url]

Never dropped a bottle on rough descents or drops.


 
Posted : 17/05/2011 3:11 pm
Posts: 0
Free Member
 

I have just got one of these

http://www.chainreactioncycles.com/Models.aspx?ModelID=1628

A Topeak one that is adjustable for different size bottles


 
Posted : 17/05/2011 3:22 pm
Posts: 0
Free Member
 

Rib Cages are great, but I'm also liking the Tacx Tao as they can be gently distorted/ovalised to create even better grip.


 
Posted : 17/05/2011 3:26 pm
Posts: 0
Free Member
 

what are these 'bottle cages' of which you speak?


 
Posted : 17/05/2011 3:39 pm
Posts: 71
Free Member
 

Using a Mt Zoom titanium one currently, as light as carbon (exactly the same as the Bontrager Race X Lite Carbon it replaced), great hold on the bottles, and doesn't mark them either.


 
Posted : 17/05/2011 3:41 pm