Forum menu
Has a winner been decided yet?
I was on a ride with someone on one of those Kinesises (Kineses?) the other week. Lovely looking frame, especially when teamed up with white SIDs with the green flash.
Well its not your grammar for sure dialledmike 😉
*ahem* it's *ahem*
Have had an Inbred, DMR Switchback, DB Prince Albert, Charge Duster and DB Alpine.
Inbred was nice and comfortable coming from a Chameleon. But too long.
Switchback was a great ride. But snapped.
DB PA - see Inbred comments.
Charge Duster just didn't feel right but I had been riding a full suss by then so just didn't bother trying to get used to it.
Now I ride the DB Alpine all the time. Its ace, just wishing it was a little lighter. A Ti version would be my bike for life (you listening Mike...?).
I had begun to believe there was nothing out there to beat my Charge Duster, but i've recently been riding a long forked alu hardtail which makes a lot more sense on the bigger hills.
The Charge is still a riot on twisty rooty stuff and short XC blasts.
I recently found love. Its not attractive to look at (Ive always gone for aesthetics first havent I?), however its far far better than the Chumba its replaced 😀
My PA has been down Nan Bield, Helvellyn, around welsh trail centres, twisted through surrey hills singletrack and jumped over doubles. I love it.
You're all wrong. My entirely impartial view is that the best steel hardtail is clearly the Rocky Mountain Blizzard
[img] 
[/img]
Here's mine, but that had no bearing on my declaring it the best steel hardtail. Nope. None at all
Nice idea Jimmy (a Ti Alpine) but Ti's not really on my agenda anymore. Nice to have Ti frames in the line up if I ever have any spare cash to spend but they drain cash flow if they don't sell quickly and sit in the warehouse for months.
hora - Member
I recently found love. Its not attractive to look at (Ive always gone for aesthetics first havent I?), however its far far better than the Chumba its replaced
You have sold the chumba already?!? haven't you only had that a few weeks.
Mike - I'll buy the prototype... 🙂
setavento can build you a sort of Titanium Alpine
[img] 
[/img]
Another vote for the Handjob here - had the older 100mm fork version and now have the new 130mm fork variety.
No problems with the frame, but I'd definitely advise a fork/wheel with a through axle on the front if you're a heavyweight (I'm 16st). Steel frames tend to flex a bit anyway, and it can all get a bit noodly feeling if you're riding the fork on a long travel steel hardtail. I stuck a 9mm through axle onto my Revelation, which made enough of a difference for my preferences.
Not ridden one of the long travel On Ones, but I have an older Inbred that now gets used for commuting most days and is a nice ride.
As of tomorrow i'll be a Blizzard owner and therefore the best steel hardtail is the RM Blizzard!! 😉
if CEN means the end of light compliant steel hardtails I'm not sure if I'd buy another steel ht, weight and feel are factors for me.
DMR Trailstar. I like 'em but I don't find many other folk do. Cheap, fun and takes a fair kicking...
Can't recommend the 456 highly enough, mines had over 3 years hard (ie clumsy!) riding and still rides as well as it did 1st day hard to beat at the price they are - I have had to bend the hanger back into shape a few times though 😀
Had a go on a mates alpine round cwmcarn and that was nice too, and would love a BFe when/if the 456 dies. Steel hardtails are great, had a 2-3 year flirtation with full suss bikes but I've ridden various steel hardtails since 1990 and I love 'em. Buy one you won't regret it.
I thought Setavento went the way of Woolworths?
I ride a Sanderson bike, but don't let that put you off. It's a fantastic bike. It is quick off the mark a good climber and has improved my poor descending skills a fair bit too. I have been on it for a 7 hr ride and a 30 min blast and loved both.
Obviously there's no one best frame, everyone wants different things from their bikes, we're all different shapes and sizes and styles and we do different things with them, and even when we're doing the same thing we do it different, and even if we do the same thing the same way we don't want the same things from the bikes we do it on.
So I'll recommend a Soul, because I'm a fanboy. But there's loads of good steel frames, I just found the Soul was a perfect match for me, there's probably others which i'd feel teh same about and obvious there's others that feel the same about 20 other frames.
Otherwise, it's hard to argue with a 456, they're versatile and inexpensive.
cynic-al CEN hasn't really ended the lightweight steel hardtail...it aint dead yet
A good On-One Steel frame for sale on here,
see
FS :- On-One 456 Steel 16" frame MTB for sale
great bikes!
doesn't the CEN testing just require the front end to be beefed up, therefore you can have a big floppy rear if you like.
richc, yep. I kept on taking the Chameleon out in rather than the Chumba even though it took alot out of me. Kinda said to me that I couldnt get quite right on the Chumba (felt too far over the front). Bought the Orange5 and I havent taken the Chameleon out once since.
Blizzards are lovely but your handicapped by the low travel you can run on them? Those Fox's are 140's?
brant - Member
Is it a hardtail? Tick.Nothing else to it.
Well, it's good to know you put a lot into your designs... 😉
if CEN means the end of light compliant steel hardtails I'm not sure if I'd buy another steel ht, weight and feel are factors for me
Agree and you dont have to be a competent/skilled-up rider to feel a noticeable weight difference either?! Especially true if you can be really physical with a bike to benefit from a stiff/stronger frame? Alot of question-marks there so don't shoot me 😉
The best frame is the one that fits you and the
way you like to ride the best.
All on this thread are the best for somebody.
glad to hear it cp!
stonemonkey - MemberLanesra - Member
Surely only 853 steel should be classed as pure steel, everything else is a poor imitation, imo
i disagree, plus how many complete 853 bikes are there
Just got a Genesis Altitude 20, 853 frame, complete bike £1100.
It is the best bike I've ever owned, but I have a sneaking suspicion that's because it's only a week old...... It may be a different story when it needs a bath.
Best steel HT?
Salsa Ala Carte.
well thats certainly given me something to think about. i do like the cotic frames but the on-one is such a good price..shame they dont have any in stock again!ill have to ponder on this and see if i can try a few out here and there.
cheers
They always sell out for a good reason? Worth the wait IMO 🙂
ok so not strictly steel, well not steel at all but it does have the absorption you're after.
[img] 
[/img]
ok so not strictly steel, well not steel at all but it does have the absorption you're after.
[img] 
[/img]
That jones thing makes the baby jesus cry it's so ugly.
Still rocking the Kobe. Now my only mountainbike. Worth waiting for a 2nd hand one if you can.
now with Pike and Rampages
[img] 
[/img]
😀
Surely they could have made that Jones with less tubing/tidier? It looks like a shelf holding ti tubes collapsed into a pile on the factory floor.
P7 love...
[img] 
[/img]
This is a great thread. I'm interested in getting an inbred, but I'm worried that the 20" is going to be too small for me. Whats the sizing of the inbred?
Cheers
Andy
It was also a 9 month old thread.
Do a search m8 and you'll find a lot more info (recent) on sizing. Are you a giant BTW ?
You should get a NS surge.
[img] 
[/img]
I'm riding a DMR Trailstar LT and it's great with 140mm Pikes on it 🙂 Head angle may be a bit steep for proper downhill but I like it for XC and jumping with a bit of milder DH thrown in.
Rode it at Cannock last weekend and it was great, probably could've done with a slightly longer stem for climbing though, but that makes it feel less responsive for jumping so I haven't bothered to change it.
Only thing I don't like about it is that the seatpost is a bit thin at 26.8mm, means you can't run a dropper on it if thats your kinda thing.
Wazn't an on1 fan but it is a vnice frame 8)