Anyone with a Nexus...
 

Anyone with a Nexus 7 rear hub?

Posts: 3058
Free Member
Topic starter
 

Should it freewheel easily or do the cranks rotate when it is being pushed by hand? jys feels like a lot of resistance like a mucky freehub


 
Posted : 07/03/2025 7:51 pm
Posts: 1151
Full Member
 

Can't remember on a nexus, been awhile since I've seen one, but my rohloff rotates the pedals when being pushed. The seals cause slight drag and is totally normal.


 
Posted : 07/03/2025 7:57 pm
Posts: 3058
Free Member
Topic starter
 

Thanksย 


 
Posted : 07/03/2025 8:47 pm
Posts: 3641
Full Member
 

Had one that is now on my sil's commuter. Don't remember it being especially draggy freewheeling. Bit draggier pedalling than an Alfine but pretty bomb proof (came on a bike I bought in Denmark - they were very popular over there when the early Alfine/ Nexus 8 had a bad reputation for corroding the bearing race). Can you take out and clean/ dunk the inner cartridge like an 8 speed?


 
Posted : 07/03/2025 8:55 pm
Posts: 3262
Free Member
 

I think you can do it just like an 8-speed. I used a 90wt EP Gear oil and it was too thick and draggy. ATF has been much better.


 
Posted : 07/03/2025 10:10 pm
 5lab
Posts: 7926
Free Member
 

I had one on my old cargo bike for years. Used to have to push it round the odd cheeky path, the pedals wouldn't turn by themselves when moving at walking pace.ย 


 
Posted : 08/03/2025 1:00 am
Posts: 7959
Free Member
 

If it's anything like my the Alfines I've owned then it'll act differently depending on which gear you're in, also depends on what BB and chain you have too.


 
Posted : 08/03/2025 10:26 am
Posts: 3058
Free Member
Topic starter
 

Ebike


 
Posted : 08/03/2025 1:56 pm
Posts: 3192
Free Member
 

Had a Nexus 7 years ago. It was bonkers draggy in some gears.ย 

Nexus 8 never had this problem - or 3 for that matter.

ย 


 
Posted : 09/03/2025 8:44 am
Posts: 17319
Full Member
 

Probably no help but my Nexus 4 doesn't rotate the cranks when I push it.


 
Posted : 10/03/2025 12:30 pm