Topic starter
Looking to get one for my pub bike 🙂
But wondering if anyone can help with dimensions to fit my one piece bars.
If you do have one and a ruler, please can you measure the bits eitherside of the clamps to see if it will fit the gaps in my bars.
(The gap is 130mm by 25mm deep)
[img] 
?oh=7e4c9c016c92951298fb4cf2c9d8ef41&oe=54E59A05&__gda__=1420804627_8214da53891dfaaa194390266e7a923f[/img]
Posted : 29/10/2014 8:16 pm
Topic starter
Bump for the weekenders
Posted : 01/11/2014 11:42 am
The figures are;
Measurements between outside of the clamps - 95mm
So yes, it should fit. The problem I had was with handlebars which weren't straight between the stem clamp and 50mm either side. But the bars in your photo look straight, so they should be fine.
Posted : 02/11/2014 5:11 pm