Topic starter
My front wheel has started to get a bit wobbly so wanted to try and service the hub. But not sure how to get at the bearings.
It's a Kona-OB1 hub, I think. It has serrated washers either side (as shown in pic) and I can't work out how to remove them. They seem pretty well stuck to the axle.
Don't want to start breaking things so thought I'd better check.
[img] 
[/img]
Posted : 26/12/2016 2:15 pm
Pull that rubber bit off and you'll find flats?
Posted : 26/12/2016 2:29 pm
[url= http://www.parktool.com/blog/repair-help/hub-overhaul-and-adjustment#article-section-1 ]Park Tools website[/url]
Posted : 26/12/2016 2:29 pm
Topic starter
Hmm, can't remove that rubber bit without removing serrated washer.
Can't find anything in the guides that explains it.
Posted : 26/12/2016 2:37 pm
can't remove that rubber bit without removing serrated washer.
It just pulls off.
Posted : 26/12/2016 2:46 pm
It'll be a standard cup and cone hub underneath
Posted : 26/12/2016 2:54 pm
Topic starter
Ah gotcha, that's it. Thanks.
Posted : 26/12/2016 2:55 pm