What drop bar shifters would work with 10 speeed dyna-sys xt rear mech? I have old type 105 10 speed shifters and run 9 speed rear mech on 10 speed 11/36 but they don;t work the dyna-sys (different pull ratio or some such).
I don't think any will - pull is 200% IIRC. Might be worth googling to see if any sram ones do by chance.
None do. If you want drop bar 10 speed shifters with an 11-36 10 speed cassette you need a 9 speed Shadow rear mech.
As cynic-al said, none will.
The good news is that any non Dynasys rear mech will work fine with them though, so just sell the 10spd XT mech and buy a 9spd one!
I've run 10 speed 105 (5600) on a 10 speed cassette/9 speed rear mech for the last couple of years (It is a 34t though).Have you tried a longer B-tension screw or is it not indexing at all?
Hmm. What I thought. I have my Gryphon set up as above with the 9spd rear mech and 10spd sti. Wanted to use the other on a new build cx - bar end shifter possibly.