Hello,

I managed round off the head of the clamp from my Rockshox remote lockout. Can anyone suggest where I might get a new one? It’s pretty tiny with a fine thread.

I attempted to measure it with my calipers and the dimensions are:
Thread diameter: 2.36mm
Diameter/length of head: 4.33mm/2.42mm
Overall length, about 12 or 13mm

Thanks!

I’ve attempted to put an image of it here:

Local Bolt Shop/Hardware shop

Did your calliper break when you were measuring the length?

That’ll most likely be m2.5 .. common enough, try yer maplins or car bits shop.

Poploc or pushloc?
I’m pretty sure I’ve got a poploc with a busted lever in the spares box I’ll have a look tomorrow if it’s poploc you need.

Any nut or hardware shop will stock that
I could get one for you when i nip in tomorrow but I dont have a reverb to take with me

if you send it to me – the bolt not the reverb 😉 – I can get you one if your local efforts fails

If you order on line you will need a thread huge to measure pitch.
Buy a mixed case off ebay for spares

> That’ll most likely be m2.5

Thanks for your kind help guys, I think that was the info I needed. I’ve ordered some from ebay!

Ive always found http://www.pro-bolt.com/ to be very helpful and have a huge selections of bolts in stock.