Viewing 5 posts - 1 through 5 (of 5 total)
  • Those cheap XT dual controls at CRC
  • iamsporticus
    Free Member

    Errrr what hoses can I fit on them?

    The spec on the CRC webpage says SM-BH59 but I cant find them listed to buy
    I can see them on a couple of other sites but not spelled exactly the same and not listed to fit the XT M775

    Or can I buy some generic Goodridge ones like these ones and then fit some spare Shimano olives I have?

    What are you using if you bought them?

    racing_ralph
    Free Member

    http://www.chainreactioncycles.com/Models.aspx?ModelID=4422

    is what you need – i have used that with my XT (2010) and its perfet

    2 lengths required btw

    adam1330
    Free Member

    I got these to go to my 2006 calipers from the £50 XT levers, if you need the banjo at the caliper end.

    tezzer22
    Free Member

    hi i use the goodridge kits with mine , easy to fit

    iamsporticus
    Free Member

    Ok many thanks

    Next numpty question about calipers

    Are these 2 the same?
    They look identical – all I can think is that one comes with a rotor
    But the cheaper one says 'no rotor' while the other doesnt make it clear

    http://www.chainreactioncycles.com/Models.aspx?ModelID=43291

    http://www.chainreactioncycles.com/Models.aspx?ModelID=20680

Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘Those cheap XT dual controls at CRC’ is closed to new replies.