Viewing 35 posts - 1 through 35 (of 35 total)
  • New Bfe build ……….pics !!
  • renton
    Free Member

    Following on from this thread..

    http://singletrackworld.com/forum/topic/its-here-new-bfe-content

    Building it up with all the bits off my stumpy full susser.
    fox float forks
    slx chainset
    slx brakes
    x9 transmission
    blah blah !!!

    Here are a few pics as promised……

    Bottom bracket thread ……..

    does it look ok ??

    now for some outside shots to give you an idea on the colour !! :mrgreen:

    just got to wait for a new bb to turn up from crc and will finish building it up !!

    robsoctane
    Free Member

    Lovely colour that! Well done!

    renton
    Free Member

    cheers

    my plans are to run it with this fork for a bit and then get a bolt through front fork and some nice wheels!!

    forge197
    Free Member

    looks good renton

    james
    Free Member

    Cotic do a green (with wrap graphic) now, me want

    Stem is hurtung my eyes a bit, kind of hoping it wasn’t also on the Stumpy
    Not sure I’d have a 31.6? thomson in a hardtail. IMO Id have shimmed a 27.2 carbon something in it

    renton
    Free Member

    ha james the stem and bars will be getting changed next !!

    31.6 seatpost for me as im 17 stone and bent my last 27.2 seaposts fitted to hardtails!

    coogan
    Free Member

    Nice wee bike. That BFE logo is… odd and the metal logos on the down tube look cluttered against the brand logo (seat tube surely?), they look a tad guff, that’ll be my job (work in an ad agency) point of view getting involved! But I’m sure that won’t stop it being a fun bike!

    kelvin
    Full Member

    Only the down tube is 853, hence putting the decal on that tube and not the seat tube.

    _tom_
    Free Member

    Think I prefer the old style graphics but that colour is nice 🙂

    King-ocelot
    Free Member

    Nice looking bike, I like the new logos but prefer the old ones. Cotic always seem to get thier colours spot on. Love my BFe, amazing frames.

    Tom83
    Full Member

    One of my frames came back from the poweder coater with some on the threads, renton. I just used a stanly knife and followed the thread. Came out ok, if you can’t wait to get it to a LBS.

    Loving the green, but prefered the old period table style BFe logo me thinks.

    damo2576
    Free Member

    BB should be faced off no?

    filks
    Full Member

    That looks ace! love the colour

    renton
    Free Member

    Damo

    Cotic say it has been faced and chased, you cam sort of see around the outside where paint has been machines off.

    AntLockyer
    Free Member

    Looks sweet.

    PrinceJohn
    Full Member

    Turn ups?

    wisepranker
    Free Member

    What weight was it once it’s built up?

    renton
    Free Member

    Not sure of weight but I’m sure it is lighter than the full suss frame it replaced.

    rumbledethumps
    Free Member

    Renton, it looks ace.

    deluded
    Free Member

    renton – nice mate. What size rotor is that on the back?

    renton
    Free Member

    180mm

    renton
    Free Member

    Rear rotor is 180mm fits fine on the frame .

    I’m glad it doesnt look to gate like to which I was a bit worried about !!

    Fingers crossed the new bottom bracket goes in ok, not convinced as the start of the threads look a bit wonky and I can’t see a definitive start to it, will have to see how it goes.

    Will post more pics when its full built.

    Cheers

    Steve

    chiefgrooveguru
    Full Member

    Turn it backwards whilst pushing gently until you feel it click as the end of the threads pass each other. Then gently turn it the other way (clockwise on RH thread, anti on LH thread) whilst applying almost no pressure. Good luck!

    renton
    Free Member

    Cheers.

    I did try that and it just wouldnt go in.

    You can’t tell from the photos of it but I can’t actually see a start to the thread.

    Going to take it to the local shop as i can’t afford to keep buying new bottom brackets.

    stephen131
    Free Member

    Just finished putting mine together ,thankfully no hassle with my BB 🙂

    renton
    Free Member

    Stephen
    Did it look like mine does above?

    How does it ride mate ?

    renton
    Free Member

    What size is it to ?
    Looks very nice build to !

    vorlich
    Free Member

    Nice! Although I too prefer the old graphics. Looks sweet in green though!

    stephen131
    Free Member

    Cheers renton ! its a large one .
    Dont know if its just the wa the light is in the pic but the threads on mine looked like a cleaner cut.

    renton
    Free Member

    Cheers

    the thread on the drive side of mine looks perfect and the bb cup went in fine.

    Non drive side is as it looks in the picture, I can’t see a definitive start to the thread and the first few threads are a bit rough.

    going to get it chased and fitted at the lbs as I don’t want to ruin it or another bb.

    have you rode it yet ?

    pese88
    Free Member

    Stephen,
    How long is the fork that you are using? 140 or 150?
    If it is a sektor, How much do you weight and how “soft” do you feel the coil? Some people told me that foe somebody that weights 13 stones it might be too soft!

    stephen131
    Free Member

    Its the dual poaition 140/120 Fork,
    I am 14 stone and yes i fell the spring is too soft so i keep the compression open only about half way and that seems to work, i will be getting stiffer spring in them when they are due serviced though.

    iolo
    Free Member

    I’m sure they’re really fantastic bikes but I can’t really get excited about a green hardtail.

    jambalaya
    Free Member

    @pesse – I have 150/120 Sektor’s on my BFe and they are about right. I weigh 12 stones 4 (78 kg)

    @iolo – get a gritstone one then, or the blue (older model) – they look great in blue

    renton
    Free Member

    stephen

    do you have a pic of it from the side on whilst it is on a level surface??

    just wanted to see how high your bars are compared to your saddle etc.

    cheers

    steve

Viewing 35 posts - 1 through 35 (of 35 total)

The topic ‘New Bfe build ……….pics !!’ is closed to new replies.