Someone has commented on my new (to me) frame on Pinkbike:

First: something like “you know that’s a 456 right?” when I asked what he meant he said: “The top tube on the 456 meets the seat tube in the same place as the seatstays, on the inbred, the TT is slightly lower. For some reason, the early 456’s were badged as inbreds (not quite sure why, i think they were known as an “inbred 455″ or something).”

I’ve looked at a few pics and can see what he means – so is he right??

Yep. 456. Top of top tube cable routing and the colour are dead give aways. That’s the best 456 colour ever too! 🙂

Good job i got it powder coated the same colour then!:) – (goes of to look for bigger forks)

Thanks btw!

Yeah, there is often confusion with the Inbred, 456, 456 Summer Slacker, due to decals used by On One at various times. Individual decals seemed to get sorted out after Brant left (2009 onwards?). There have been a few classifieds where unknowing people have advertised an Inbred and others have pointed out to the seller what the frame actually is.
This is my 2008 456 Summer Slacker

It was called “that green” I think. There was a blue called “Triggers mums bathroom blue” as well
IIRC there were very few green ones and they were sort of sought after for a time because they were rare.

From memory doesn’t the 456 have the same diameter top and down tube?

That’s a 456 – you can tell by the pipework being matching sizes.

From memory doesn’t the 456 have the same diameter top and down tube?

Yup!

Wasn’t “Triggers mums bathroom blue” the original pompino colour?

I had a “that green” 456, it was ace! I bent the rear triangle and bought a “that blue”

One of my fav bikes ever!

You clever lot!

What’s this then?

Just for a bit of fun!

Does the 456 have bigger dia tubes, or just thicker ?

summer season not summer slacker

Repainted RAL 6019

[

Pretty close to the original I reckon

Not bad!
Get the decals off a guy off Ebay and bid him £6 and he will take that! :wink:http://www.ebay.co.uk/itm/ONE-inbred-inbread-bike-frame-sticker-decal-set-ON-1-/230533793149?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item35ace2857d#ht_500wt_719

did you get the forks done the same colour – notice they’re disassembled int hat 2nd pic?

tk46hal – Geared Scandal?

Thanks TK already ordered them for £11.00 tho 🙁

WWW – not my forks, thats from the Ebay add I bought from – they said they will do em for free if I take em back but not bothered TBH

@tk46hal

16″ 29er inbred? or maybe even a mythical 14″

tk46hal – scandal 29er in 16″.

Yes!

ANDYL! CORRECT.

Aren’t we all anoraks! 😀

Lol that’s why I double checked on here!

Does the 456 have bigger dia tubes, or just thicker ?

Actually, the new Inbred frames, it seems, since having to be uprated to pass EN testing have the same main tube dimensions (wall and diameter) as the 456’s.

According to CRC, it’s an Inbred 456. Same colour available even (discontinued now).

http://www.chainreactioncycles.com/Models.aspx?ModelID=8251

Tops, that’s a lovely colour!

I’ve got the EPS file of the stickers if you’re interested?
Email me if you want them, in profile 🙂

EDIT
I see you have them already………! 🙂
This file I have can be manipulated by any graphics company, I had a mate make my C456 stickers from it:

IMG_0867 by PeterPoddy, on Flickr

I got bored with the On One stickers so I stuck these on that my mate cut out for me!

Peter, ygm re: sticker designs – ta!

Cheers PP

Do you reccomend I helitape over the stickers? Actually I’m thinking not – cheap enough to replace now I’ve got your details! 🙂

Nice bike BTW!

Stickers on

Nice that

Yeah, top tube and seatstay intersect at same point on seat tube is a 456, Seat stay higher than top tube is Inbred

cruzheckler – Member
summer season not summer slacker

Don’t know why I called it Summer Slacker, old and confused I guess. 🙂

B.a.nanas bike up there – is that a raw finished steel frame? Looks good, can’t see from size of image what the finish is.

So is mine actually an Inbred like it says it is??

jackthedog, yes raw finish, which was all it was available in originally. It was after Brant left that it started to come in multi colours and with ISCG mounts. Despite just a lacquer finish, it hasn’t rusted much in 3 years, anymore so than On One frames normally do. Tho it has spent more time on the workstand as various projects being built, than actually ridden.

what frame is this then….

Barry, yep, that’s a normal Inbred. Cable guides UNDER the top tube. 🙂

Ebb 456 sample. 1 of 2?

Chainstay bridge. Is that a CEN thing too?

Chainstay bridge. Is that a CEN thing too?

Older Inbreds had the bridge and IMO much better for it as mine didn’t suffer chainsuck.

Ebb 456 sample. 1 of 2?

not sure, could be 2 of 2, this was sold to mark y, english fella in ROI who sold it to me.

it’s now like this but mucky:

http://singletrackworld.com/forum/topic/prototype-456-ebb-alfine

on ps3 so struggling to link properly.