Viewing 4 posts - 1 through 4 (of 4 total)
  • dualit toaster help
  • petefromearth
    Full Member

    where else would i turn for toaster advice??

    bought a 6 slice vario toaster off ebay. it’s orange, so we’re very excited, and virtually new, it appears

    it was listed as ‘not working’ but i know you can get spares so (hopefully) I got it cheap, and a little project for the evenings

    am i right in thinking that measuring the resistance will tell me which elements are duds? has anyone else done this?

    cheers

    Pete

    peteimpreza
    Full Member

    You can get the spares direct from the Dualit website.

    petefromearth
    Full Member

    actually i think it must be new-old-stock. it’s never been used as there is not a single crumb inside. the serial number says it was made in 1996, and the elements appear to be a different design now. hopefully still compatible!

    Marko
    Full Member

    Yes – No problem to test them with your meter. On the older ones just run your hand up and down. You’ll spot the break. I think the newer ones are enclosed?

    Simple enough inside and easy to replace.
    Hth
    Marko
    ** Normal H&S stuff applies here. Unplug it first.**

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘dualit toaster help’ is closed to new replies.