Singletrack Mountain Bike Magazine

• Overview
• Bike Forum
• Chat Forum
• For Sale
• Wanted
• Forum Help
• Classified Rules

Bike Forum

1. mikey74 - Member

   I need to get some for some Code R brakes with 200 rotors. I have the adaptors, but I see there is also a cup and cone system of spacers that does with it as well.

   Is it the same for front and rear? Also anyone know where I can get them from? I have searched long and hard but nowhere seems to sell them for 200mm rotors, although I don't really see what the rotor size has to do with it: Surely that is what the adaptor is for isn't it?

   Posted 5 months ago #
2. BoardinBob - Member

   On my 203mm Juicy, the mounting bolts are a lot longer due to the adaptor. It's about twice the length of the rear bolt and it needs to be in order to pass through the adaptor and into the post mounts.

   Posted 5 months ago #
3. mikey74 - Member

   I can't seem to find anywhere that does the 200mm kit.

   Posted 5 months ago #
4. foxyrider - Member

   That's because avid rotors are now 203 - you can get a 203mm rotor kit - only 3mm - should be fine with your 200 rotors you could just shim the adapter?

   Or dont use Avid hardware - just use other mounting kit for FR/Rr suck as formula?

   Posted 5 months ago #
5. mikey74 - Member

   These are Avid rotors. I was wondering that: I assume you can just mount them like you would Shimano or any other brake?

   Posted 5 months ago #
6. foxyrider - Member

   Take that back - you can still get 200mm Avid sweeps rotors.

   Well the PM ones usually have slotted holes you can moved them around?

   IIRC you prob have a post mount front and an IS back? That is why they are different - IS front and back are interchangable.

   So you need a IS rear 200mm Avid adapter

   

   Posted 5 months ago #
7. mikey74 - Member

   Yeah, I got the adaptors, I just need the screws and cup and cone spacers.

   Posted 5 months ago #
8. foxyrider - Member

   Ahhhh - OK that's a bit easier then

   http://forums.mtbr.com/brake-time/avid-juicy-3-5-160mm-203mm-rotor-678182.html

   You just need std CPS kit for 160 mm rotors?

   The 203 adapters bolt to the existing 160 adapters with a std Bolt?

   Posted 5 months ago #
9. mrjmt - Member

   if you're using an IS - PM adaptor this is what you're after...

   http://www.chainreactioncycles.com/Models.aspx?ModelID=21475

   Posted 5 months ago #
10. foxyrider - Member

    Sorry I was talking crap about the prexisting - that's only for IS front. Confusing myself now!

    

    The MTBR is right. You need (and I assume you have) the 40mm IS and 60mm PM fitting as above which use 2 sets of std Avid blts

    Posted 5 months ago #
11. mikey74 - Member

    That clarifies things. Thanks for the assistance.

    Posted 5 months ago #

RSS feed for this topic

Reply

You must log in to post.