Sram X0 Crank Bolt

Home Forum Bike Forum Sram X0 Crank Bolt

Viewing 5 posts - 1 through 5 (of 5 total)
  • Sram X0 Crank Bolt
  • All-On-Black
    Member

    Hi,

    Just tried to take my chainset apart for the first time to service the BB, but on undoing the crank bolt, the whole bolt and puller cap has come out of the crank. Now I don’t know how to get the cap back in. Special tool?

    Cheers

    All-On-Black
    Member

    nobody know anything about this then??

    nicolaisam
    Member

    16mm hex key.

    5/8″ hex head bolt as a substitute,From the park tools site.

    Premier Icon mtbfix
    Subscriber

    As you are just screwing the pulling cap back in and only need it so tight you can use a 6mm and a 10mm hex key popped in together. That is how I have done mine in the past. Clearly do not try to over tighten as this will knacker it.

    All-On-Black
    Member

    Ah excellent, i’ll give those idea’s a go. Thanks guys

Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘Sram X0 Crank Bolt’ is closed to new replies.