Viewing 23 posts - 1 through 23 (of 23 total)
  • Hope factory wheelset for xc – which one ?
  • iainc
    Full Member

    Looking at pro 2 hubs, for a 12.5/13 stone rider on hard tail. Tyres 2.1 to 2.3 Max. Won’t be running tubeless.

    What rims should I go for ? I only have experience of 717’s but would like something for bigger tyre

    Thanks

    matther01
    Free Member

    Arch Ex would be my choice (if no hard dh involved)…although you might get away with crests if you don’t hammer them though rock gardens

    LoCo
    Free Member

    Crest

    iainc
    Full Member

    Thanks. What tyres can the crests take as they seem a bit lighter ?

    LoCo
    Free Member

    I’ve got a 2.25 UST Nobby Nic on the front which seemed to fit ok.

    iainc
    Full Member

    Thanks Loco

    steve_b77
    Free Member

    Another vote for crests here. You’ll be fine with anything upto a 2.25/2.3″ tyre on there.

    If you buy the crests or any other Stans rims, get the tubeless tape & valves to go with some new tubeless tyres, it’s worth it in the long run

    Jeffus
    Free Member

    Crests , I’m running 2.25 Ardent up front and a 2.2 Ikon rear, 15 stone 😳 rider…just ride them and small jumps n drops no problem.

    iainc
    Full Member

    Thank all, looks like I’ll go with crests

    boxelder
    Full Member

    I’ve got a pair of almost new hope hoops for sale – Pro2 straight pull, crest rims. £200 plus p&p.
    RRP is £350+
    The rear has had 15 miles and the front a couple of SS rides ( so short!)

    iainc
    Full Member

    Thanks boxelder, a good deal, but am going for full bike build from shop as they are sorting me a package. Thanks tho

    metalheart
    Free Member

    Currently got 2.35 High Roller LUST’s on a set of crest hoops (tubless).

    Not had any problems and run them on a Soul, a Soda and a vf2 at one point. And I’m heavier than you…

    Ecky-Thump
    Free Member

    Crest
    I’m bigger than you and somewhat lacking in finesse.
    2.35 Minion or 2.3 Purgatory, tubeless.

    njee20
    Free Member

    +another for Crest

    MrTall
    Free Member

    I have a set sat next to me in the office that just arrived today.

    At 15st (without kit) i opted for the Arch EX rather than the flows i have on other bikes as this build is a bit more XC. The crests are appealing but i’d rather have a bit of extra strength over a small weight saving.

    MadBillMcMad
    Full Member

    boxelder, How come & what colour ?

    chives
    Free Member

    I’m 12.5 stone, no problems on Crests (I’m not the most gifted driver) over 1500 miles or so.

    boxelder
    Full Member

    Mad bill

    How come? – I’m down to just one 26er, and it’s SS.
    Colour – all black.

    Ian – I’d go with arch ex rims.

    nbt
    Full Member

    😯

    I’m running 2.4 Ardents on my crests.

    nbt
    Full Member

    😯

    I’m running 2.4 Ardents on my crests.

    mattjg
    Free Member

    2.35 on my 29 Crests went on a doddle and seated tubeless with barely a puff

    (I took them off as they were too heavy, but that wasn’t the fault of the rim)

    iainc
    Full Member

    Thanks all

    iainc
    Full Member

    crests ordered, here’s hoping they stay round 🙂

Viewing 23 posts - 1 through 23 (of 23 total)

The topic ‘Hope factory wheelset for xc – which one ?’ is closed to new replies.