Viewing 19 posts - 1 through 19 (of 19 total)
  • Cheap (ish) alu HT frame in XS
  • surroundedbyhills
    Free Member

    I know On-one Inbred is good VFM but what/who makes a good slackish HT frame in XS – 13 or 14″ for the same money?
    Project build for daughters birthday.

    pickle
    Free Member

    As you say you’ll be pushed to find anything as good value as this

    http://www.on-one.co.uk/i/q/FROO456E2/on-one-456-evo2-frame

    I love mine

    Yak
    Full Member

    Commencal El Camino. There were some available direct a while ago. Just had a look – none now 🙁
    The stw inspired ‘rush’ recently must have cleared them out.

    Doh1Nut
    Full Member

    I have got a 16″ On one scandal hanging from the garage wall – which sounds a bit large but it is 13″ center to center if I recall so the stand over is pretty good.
    mail me if interested 🙂

    thesurfbus
    Free Member

    My 9 year old 4’11’ rides a 16″ Onone Whippet for reference

    Leku
    Free Member
    surroundedbyhills
    Free Member

    what’s the difference between a 456evo and Inbred?

    Leku
    Free Member

    Inbred is 100mm to 120mm travel.

    456 is 100mm to 150mm travel forks. Much slacker.

    benpinnick
    Full Member

    I have a one off Zero TR in baby blue that might suit the bill- Slack and low… email me on ben@birdmtb.co.uk if you’re interested. Will be a bit more than an inbred, but a one off in a great colour (and much lighter too!).

    ste_t
    Free Member

    Not particularly slack, but 13″ and £91 delivered.

    Cube access

    surroundedbyhills
    Free Member

    So Daughter #2 got her Cube Access and I built it up with SLX and a set of Marzocchi ZE forks – very happy wee bunny…

    mamadirt
    Free Member

    😀 8)

    MoreCashThanDash
    Full Member

    Currently building an Inbred for/with my lad, but can’t see him having the balls to ride those steps just yet!

    Mind you, my kids frequently amaze and – sometimes – delight me….

    dufresneorama
    Free Member

    Kids bounce… I definitely make a “thud” nowadays with little to no rebound.

    ste_t
    Free Member

    What headset did you use OP?

    Still to start building the one I got for the girlfriend

    surroundedbyhills
    Free Member

    I used a ritchey zero logic 1 1/8.

    I also got HT II and Alivio cranks for the weight, but smaller cranks are available if you use sq taper.

    Other wise it’s a great looking bike, I’ll get a better shot off it and post up.

    Poopscoop
    Full Member

    Not sure on sizing but have you looked at the Dartmoor Primal/ Hornet?

    Really nicely made alu frames and pretty cheap too.

    Slam69 is their Uk importer. The Dartmoor site has all the sizing/ geo info.

    surroundedbyhills
    Free Member

    Couple of pics, post ride wash!

Viewing 19 posts - 1 through 19 (of 19 total)

The topic ‘Cheap (ish) alu HT frame in XS’ is closed to new replies.