Forum menu
Topic starter
I'm putting curtains up, should I pull out the old rawl plugs or drill them out or drill fresh holes?
Thanks
Posted : 25/05/2015 5:47 pm
whats wrong with reusing existing holes?
Posted : 25/05/2015 5:50 pm
Can you not pull the old ones out with pliers?
Posted : 25/05/2015 5:51 pm
Just leave the plugs in if the screw will go in ok. If not replace or redrill as required.
Posted : 25/05/2015 5:57 pm
Topic starter
I want to re-use the existing holes, the rawl plugs have to be replaced, pulling them out with pliers is my plan but want to make sure I won't wreck the holes doing so.
Posted : 25/05/2015 6:24 pm
Put a screw in to the existing rawl plug, then use claw hammer to lever out screw and plug, just be careful not to apply too much force.
Posted : 25/05/2015 8:11 pm
Could you get your friends Kurt and Rod to help you?
Posted : 25/05/2015 8:11 pm
If they are in plasterboard snip the ends and push them in.
Posted : 25/05/2015 8:23 pm