Forum menu
XT mech, shifter and 11-46 cassette: sticks when shifting from 1 to 2, 3, etc.
Anyone else get/got this??
Top jockey wheel or cage fouling the cassette or restricting chain movement? If so can be fixed with B screw adjustment.
How new are the cables?
When mine get sticky on my commuter I give them a wipe with some grease (or reverb fluid round the loop) and they normally come back to life for a bit.
Could be anything from the b screw not in enough to keep the mech and chain off the lower part of your cassette to dry inner cables or sticky shifter
prawny - Member
How new are the cables?When mine get sticky on my commuter I give them a wipe with some grease (or reverb fluid round the loop) and they normally come back to life for a bit.
Cables are 7 months old. Which loop? as it exits frame and loops round to the mech clamp?
Jef Wachowchow - Member
Top jockey wheel or cage fouling the cassette or restricting chain movement? If so can be fixed with B screw adjustment.
Adjust how... j-wheel nearer or further away from cassette?
Which loop? as it exits frame and loops round to the mech clamp?
That's the one, don't think MTBs have one though anymore.
Are the gears indexed correctly the rest of the way through the cassette? Or is it sticky all the way up the block?
j-wheel nearer or further away from cassette?
Further away. Wind the screw in quarter turn at a time and test until free.
Replace the cables, ..and make sure they are shimano inners & outers.
dumbbot - Member
Replace the cables, ..and make sure they are shimano inners & outers.
It's done it on and off from new, worse when they conditions are shitty.
Jef Wachowchow - Member
j-wheel nearer or further away from cassette?
Further away. Wind the screw in quarter turn at a time and test until free.POSTED 16 HOURS AGO # REPORT-POST
Will give that a go, cheers
prawny - Member
Which loop? as it exits frame and loops round to the mech clamp?
That's the one, don't think MTBs have one though anymore.Are the gears indexed correctly the rest of the way through the cassette? Or is it sticky all the way up the block?
There is actually so i've blasted some gt85 in and run it up and down the cassette a few times - hopefully this and the b-tension rls will sort it.
The gears are indexed perfectly appart form the upshift from 1 to 2.
PP, did you get it working right? What was the issue in the end?
sticky clutch. my zee mech does it now and again with the clutch on.
smooth when you turn it off, sticky and notchy when you turn it back on.
Mine done exactly the same
New cable time been riding in some sh1t weather so the inner and outer will be caked in gunk