Forum menu
Topic starter
Help please!?
I have just bought a replacement QSH OPI stem for my 'dale Flash
Normally a stem would be the easiest part to replace but I have no clue with the Lefty stem (to fit an XLR fork) - there doesn't appear to be an obvious starting point.
Should I give up and book it in to the LBS?
Posted : 29/06/2015 7:37 pm
Undo the 2 clamp bolts and use a shimano ht2 bb tool on the bottom of the steerer to unwind it from the steerer.
[url= http://media.cannondale.com/media/Lefty_hybrid_2013/129143_Lefty_Hybrid_Screen_EN.pdf ]Page 13[/url] or page 11
Posted : 29/06/2015 7:52 pm
Topic starter
Great stuff, thanks
Posted : 29/06/2015 10:11 pm
you need to tap the stem up - careful as the thread comes right to the end (female thread in stem), so whatever you're tapping up there, if misaligned, can balls up the thread.
I did just that.
Posted : 30/06/2015 2:37 pm