Forum menu
Topic starter
Translate
▼
English
Spanish
French
German
Italian
Portuguese
Russian
Chinese
Japanese
Korean
Arabic
Hindi
Dutch
Polish
Turkish
Vietnamese
Thai
Swedish
Danish
Finnish
Norwegian
Czech
Hungarian
Romanian
Greek
Hebrew
Indonesian
Malay
Ukrainian
Bulgarian
Croatian
Slovak
Slovenian
Serbian
Lithuanian
Latvian
Estonian
Hi gang, I have a new rear wheel with a Stans ZTR hub. When I came to put the cassette on, I noticed that the splines are not the same as on my Hope pro 2 and the cassette is a rather loose fit. What's going on here? I've not managed to speak to JRA for the last few days and I don't like to fit the cassette and start riding if it's not a nice snug fit. Have any of you guys had this problem?
Posted : 09/05/2010 11:18 am
Translate
▼
English
Spanish
French
German
Italian
Portuguese
Russian
Chinese
Japanese
Korean
Arabic
Hindi
Dutch
Polish
Turkish
Vietnamese
Thai
Swedish
Danish
Finnish
Norwegian
Czech
Hungarian
Romanian
Greek
Hebrew
Indonesian
Malay
Ukrainian
Bulgarian
Croatian
Slovak
Slovenian
Serbian
Lithuanian
Latvian
Estonian
Pos not the same problem, but on my new hope hubs the cassette was loose. This was due to a depth issue between xtr and other cassettes. I ended up fitting a thin washer on the hub first. This allowed the lock ring to keep everything tight.
Posted : 09/05/2010 11:47 am
Topic starter
Translate
▼
English
Spanish
French
German
Italian
Portuguese
Russian
Chinese
Japanese
Korean
Arabic
Hindi
Dutch
Polish
Turkish
Vietnamese
Thai
Swedish
Danish
Finnish
Norwegian
Czech
Hungarian
Romanian
Greek
Hebrew
Indonesian
Malay
Ukrainian
Bulgarian
Croatian
Slovak
Slovenian
Serbian
Lithuanian
Latvian
Estonian
Cheers Bear. My problem is the size of the splines rather than the depth of the freehub.
Posted : 09/05/2010 11:19 pm