Show us your deatht...
 

[Closed] Show us your deathtraps

Posts: 0
Free Member
Topic starter
 

Rebuilt my gary fisher, it's cracked at the seattube, the rear wheel was rebuilt with spokes that are too long and the dishing is completely off. 2.5'' tyre on a 23mm rim on the front, headset installed with a mallet and it's too small for me. Most fun MTB I've owned and it owes me about £100.

[img] [/img]


 
Posted : 12/04/2014 12:04 pm
Posts: 10975
Free Member
 

That's no deathtrap, just [i]shonky[/i], bit like my 69er'd 15.5" HJ - the BB is so high it interferes with satellites.


 
Posted : 12/04/2014 12:09 pm
Posts: 2653
Free Member
 

[URL= http://i100.photobucket.com/albums/m7/pjspooner/IMG00796-20120505-1142.jp g" target="_blank">http://i100.photobucket.com/albums/m7/pjspooner/IMG00796-20120505-1142.jp g"/> [/IMG][/URL]

Weld on the rear pivot of my Scott G Zero. The weld was done two years ago, and the bike is still going strong after frequent use


 
Posted : 12/04/2014 12:15 pm
Posts: 3361
Full Member
 

[URL= http://i1097.photobucket.com/albums/g341/kiwijohn42/46bf0c2d.jp g" target="_blank">http://i1097.photobucket.com/albums/g341/kiwijohn42/46bf0c2d.jp g"/> [/IMG][/URL]
What you have to do when a bike company goes under.


 
Posted : 12/04/2014 12:29 pm
 JoeG
Posts: 0
Full Member
 

What you have to do when a bike company goes under.

Attach a piece of tire to your shock? ❓ Is that some sort of outward display that you are mourning the brand's passing? 😉


 
Posted : 12/04/2014 6:18 pm
Posts: 5938
Free Member
 

is that a torture device from Saw?


 
Posted : 12/04/2014 6:20 pm
Posts: 0
Free Member
 

My death trap- old Giant Cadex which has been bastardized into a fixie, with bars off an old raleigh girls bike. It's a proper hipster sled, and I think the lugs are coming away from the carbon tubes, but i ****ing love it. The frame is dated around 1990-1992- gotta be one of the oldest carbon ones around, eh?

[img] [/img]


 
Posted : 12/04/2014 7:21 pm
Posts: 12265
Full Member
 

^^^ That's a proper bike!


 
Posted : 12/04/2014 7:26 pm
Posts: 10975
Free Member
 

A fixie with a tensioner like that wins the deathtrap race to death so far!


 
Posted : 12/04/2014 7:26 pm
 Haze
Posts: 5442
Free Member
 

Not sure it's actually a death trap, I did over 5000 miles on this including some reckless alpine descents believing it to be a lacquer crack...

[img] [/img]


 
Posted : 12/04/2014 7:28 pm
Posts: 0
Free Member
 

Defo counts as a deathtrap if you rode it with a Stanley blade in it


 
Posted : 12/04/2014 7:36 pm
 Haze
Posts: 5442
Free Member
 

I stick 'em in the cracks in my carbon bars too...


 
Posted : 12/04/2014 7:50 pm
Posts: 50252
Free Member
 

This thread is seriously lacking cutlery.


 
Posted : 12/04/2014 7:53 pm
Posts: 0
Free Member
 

I should point out at this point, that the bike had a freewheel at this point- It's now a proper fixie with no tensioner. It's vertical dropouts, but running it 42/16 with a half-link chain seems to fit perfectly! It's also got a deep section front wheel now to make it even more hipsterrific!


 
Posted : 12/04/2014 8:26 pm
Posts: 1282
Full Member
 

I wouldn't class these as death traps, but I've frequently been told they are!

[url= http://2.bp.blogspot.com/-eqrs9F_G36g/U0lnySqdGRI/AAAAAAAACuM/HA1LAdnsrzk/s1600/IMAG1070.jp g" target="_blank">http://2.bp.blogspot.com/-eqrs9F_G36g/U0lnySqdGRI/AAAAAAAACuM/HA1LAdnsrzk/s1600/IMAG1070.jp g"/> [/img][/url]

Finished it on friday - let hope it holds up!!!!

[url= http://i1331.photobucket.com/albums/w593/oliverracing/994f5cc8-1558-4075-a5e8-667d06e71cc3_zpse115a64f.jp g" target="_blank">http://i1331.photobucket.com/albums/w593/oliverracing/994f5cc8-1558-4075-a5e8-667d06e71cc3_zpse115a64f.jp g"/> [/img][/url]

Been riding to for about 10 months now - only tried to kill me a few times - my favorite was when the bb shell came debonded around cannock (below)

[img] [/img]

EDIT: thinking about it, I've also been told the disc mount is a death trap too
[img] [/img]


 
Posted : 12/04/2014 8:33 pm
Posts: 11402
Free Member
 

a bit of tyre wear 😳

[img] [/img]


 
Posted : 12/04/2014 8:47 pm