[Closed] Show me your Handjobs.........please.

is it ok if it's not resting against a wall?

shall i drag out the pics of my broken one again?

Only the back tyre resting against the wall..
[IMG] [/IMG]

It is currently sporting slicks, narrower bars and one bar-end as had been used for a few commutes (injury forced), so looks a little jeyer.

My mate's was stolen about a week or so ago from Stirling. So could you keep an eye open for it? Black, 17inch (ish) frame with Revelation on the front and old Hope Mini brakes with wavy rotors.

Cheers

B.

Any pics welcome, complete or in bits.......

I'm too Jey to break anything.

The seatpost is not ridden that high btw 😉

[img] [/img]

Like that, and a very tidy wall...

I quite not get how people manages to break it.
In black
[img] ?v=0[/img]
[img] ?v=1203285297[/img]
[img] ?v=0[/img]
[img] ?v=0[/img]
In red
[img] ?v=0[/img]
[img] ?v=0[/img]
[img] ?v=0[/img]
ANd I even have some of it resting against the wall.
[img] [/img]
[img] [/img]

[img] http://farm4.static.flickr.com/3385/3258571710_f029a82e26.jpg [/img][img] http://farm4.static.flickr.com/3331/3473822882_428ed67b3b.jp g" target="_blank">http://farm4.static.flickr.com/3385/3258571710_f029a82e26.jpg [/img][img] http://farm4.static.flickr.com/3331/3473822882_428ed67b3b.jp g"/> [/img]

Although slightly more Jey as it's running Reba Races instead of Rev 426's and Ignitor Exceptions front & rear

Pynlimon pic dragged out yet again

[IMG] [/IMG]

now with 100mm QR15 Floats replacing Reba U-turns

My girlfriend's rather nice pink and white one!

[img] [/img]

dav can I be you gf too?

Me and mine in Kaprun last year...

[IMG] [/IMG]

hhhmmmmm

[IMG] [/IMG]

[img] [/img]

[img] [/img]

A bit of before and after - rigid version now has slicks for commute.

Mine broke, replaced with a PA, cheaper and imo far better.
Still waiting on the half price crash replacement one from Silverfish, via Alpine (originally bought the frame at Bikesport), been about ten months now, shocking customer service

[img] [/img]

[img] [/img]

Hey Space Man

Give me a call in the Silverfish office on 01752 843882 as we seem to have no record of dealing with a crash replacement HJ through Alpine.

We have all sizes of HJ's in stock and have done all year so I cant see why there would be a delay?

Are you sure we've been contacted about a replacement?

Anyway, give me a call if you want to discuss it further, I know we're considered as slack southerners, but not TEN months worth of slack 🙂

Cheers

Richie

Richie I've been popping into alpine every few weeks/months and they always say that Silverfish haven't got back to them. I haven't been pushing hard to get something done as I have another frame already, would be good to get a frame on the cheap though to build up for my lass. I'll be passing Alpine tomorrow so i'll pop in and see what they've got to say, thanks for the info, cheers.

Jeez spaceman what have you done to it...

Mind you now I doubt rich will warranty my frame 😉

someone posted a pic of a lovely white one with white revelations on it awhile back, probably the nicest bike I've ever seen on here. Hope they post it again.

spaceman, what did you do run into a f***ing truck? you have me worried as I have one in the cupboard waiting to be built

huslter look at mine... I am not really tender with it and it's still going strong...
Mind you as I said not sure you can say I am riding XC... Not from everybody standard

Spaceman
I'm not sure what Alpine think they are waiting on from us?
If you are the original owner and have the receipt then all that needs to happen is your Cove dealer, gives us a buzz and arranges to send the frame and paperwork back. We then deal with it from there on.

I'm not sure why they would drag their heels over it except for the fact that the crash replacement deal is all done at cost prices so both ourselves and Alpine would not make any money from it, hence, especially if you didn't purchase the frame there originally, they may not want to deal with it??? However, if that was the case, they are under no obligation to do so, so I'd expect them simply to tell you that.

As I said above, give me a call directly if you'd prefer.

Cheers

Richie

[url= http://farm4.static.flickr.com/3388/3519830200_5c4717025a.jp g" target="_blank">http://farm4.static.flickr.com/3388/3519830200_5c4717025a.jp g"/> [/img][/url]

This thread has forced me to bid on a handjob on the evil fleabay!

I do really want it now tho.

It's the way forward Andy, cracking accompanyment to a LT FS bike

Loving this thread, I have just (this week) sort a good deal on a nice orange handjob they've had hanging up for the past year at Oneplanet in Llandegla. I've been uming and aring over it for the whole 12 months and finally desided it would make a good birthday present as the price seemed to good to miss. Pick it up Saturday, very excite (and thus equally sad).

What size forks are people going for?

the original
[img] [/img]

after it folded a bit after colliding with someone both of us trying to get the apex of a corner
[img] [/img]

the replacement i had from silverfish (took less than a week as i recall)
[img] [/img]

johnikgriff - Member
What size forks are people going for?

I've run both U-Turn Rev's and now have Reba Races on mine, I think the bike rides best @ 115mm.

[i]Nick - Member
someone posted a pic of a lovely white one with white revelations on it awhile back, probably the nicest bike I've ever seen on here. Hope they post it again.
[/i]

That'd be Deluded's. Piece of supreme georgeousness.

Piece of supreme georgeousness

Need to see, can someone get a photo up....

Steve Ive put my bid in and Im hoping for the best good thing is I probably wont be on a computer again before it finishes I do hope I get it. Its an old steel one like Juans.

I do need a good HT to go with the Pitch. I cant just have a Pitch and a road bike I need something in the middle.

an old steel one? they're all steel

Oops sorry for some reason I thought the new ones were ally. Must be the big DT.

[/idiot]

check the ebay ad doesn't say aluminium handjob! 😕

No it doesnt it was just me being thick because Im waaayy to hot in my office.

It even says steel retro. Im pretty sure its the real thing.

[img] [/img]

I just hope nobody off here outbids me.

[img] [/img]
/p>

eisily fixable bitta mig welding/hammer bashing could turn out like my trusty NOT SHAGGED heckler 🙂

Armchair engineer geek hat on...... 8)

Would the fact that the down tube gusset is welded across (therefore concentrating any frontal forces against it) have been a contributing factor to that frame above failing where it did?

Not meaning to kick up a fuss, just i have noticed that a few frames have the gusset open (a la Inbred), where as other frames weld across the gusset.

WHERE IS THE WHITE ONE?

[i]WHERE IS THE WHITE ONE?[/i]

he had a heart attack last night, where have you been??

lol

Still we are waiting for the White one...

I've emailed him!

Good boy 😀
Will I see at THE event btw?