RockShox fork servi...
 

MegaSack DRAW - 6pm Christmas Eve - LIVE on our YouTube Channel

[Closed] RockShox fork service kits?

9 Posts
9 Users
0 Reactions
124 Views
 bfw
Posts: 693
Full Member
Topic starter
 

I am really struggling to get a service kit for my wifes Pikes and my boys 30 Golds forks. I am looking for a service kit of any description, even just the seals and foams would be a start.

I am being quoted on a delivery of April 2023

Any thoughts or recommendations?


 
Posted : 09/03/2022 10:41 am
Posts: 778
Free Member
 

Find out the seal sizes and get yourself down to Pirtek. The foam you can 'wash' and re-oil.


 
Posted : 09/03/2022 10:45 am
Posts: 0
Free Member
Posts: 953
Free Member
 

As above - plenty of seals and foam rings on ebay.

Unless anything is broken, air side can be stripped, cleaned and re-lubed.

Leave the dampers alone unless problems but they are easy to bleed/change oil, instructions on RockShox website, oil on ebay.

Actual full service kits are hard to come by ..... which is ridiculous when the manufacturers are happily selling us the forks, I'm looking especially at you RockShox 🙁


 
Posted : 09/03/2022 1:48 pm
Posts: 1219
Full Member
 

I use eBay - SKF seals, foams and crush washers for a pair of Fox 34s were £26, and I have a stash of decent oils for a lowers service. If I need a full service, I tend to ship it off to a specialist instead.


 
Posted : 09/03/2022 2:47 pm
Posts: 37
Full Member
 

Try TFTuned.

They just put me together a kit for my 2010 Lyriks.


 
Posted : 09/03/2022 3:25 pm
Posts: 0
Full Member
 

Another nod for TFTuned.. really helpful there 👍


 
Posted : 09/03/2022 3:36 pm
 bfw
Posts: 693
Full Member
Topic starter
 

great tips, thank you all 🙂


 
Posted : 09/03/2022 4:41 pm
Posts: 650
Full Member
 

Sprung have also put kits together for me in the past


 
Posted : 09/03/2022 4:49 pm
Posts: 861
Free Member
 

Last time I bought a Rockshox service kit I only used half the bits. I think it had o-rings etc for other forks.
Now I would just buy the bits individually and probably save a bit too.
Worst case you have to measure something and then wait for it to arrive.


 
Posted : 11/03/2022 4:16 pm